Honeywell XLS140-2

Fire Alarm Control Panel

  • Material Obsolete
Brand: Honeywell FireAlarm.com Part #: 47275 Categories: , Manufacturer Part #: XLS140-2

Description

In stand-alone or network configurations, Honeywell’s XLS140-2 meets virtually every application requirement.

Designed with modularity and for ease of system planning, the XLS140-2 can be configured with just a few devices for small building applications, or for a large campus or high-rise application. Simply add additional peripheral equipment to suit the application.

The FireWatch Series internet monitoring modules IPDACT-2 and IPDACT-2UD permit monitoring of alarm signals over the Internet, saving the monthly cost of two dedicated business telephone lines. Although not required, the secondary telephone line may be retained providing backup communication over the public switched telephone line.

Information

Weight 20 lbs
Production Status

Features

  • Listed to UL Standard 864, 9th edition.
  • One, expandable to two, isolated intelligent Signaling Line Circuit (SLC) Style 4, 6 or 7.
  • Up to 159 detectors (any mix of ion, photo, thermal, or multi-sensor) and 159 modules (Addressable pull stations, normally open contact devices, two-wire smoke, notification, or relay) per SLC. 318 devices per loop/636 per FACP or network node.
  • Standard 80-character display, 640-character large display, or display-less (a node on a network).
  • Network options:
    • High-speed network for up to 200 nodes (XLS3000, XLS140-2, XLS140, XLS-NCA/-NCA2 Network Annunciator, or XLS-DVC).
    • Standard network for up to 103 nodes (XLS140, XLS140- 2, XLS3000, XLS-NCA/-NCA2 Network Annunciator, or XLS-DVC, and Honeywell Enterprise Buildings Integrator [EBI]). Up to 54 nodes when DVC is used in network paging.
  • 6.0 amp switch mode power supply with four Class A/B built-in Notification Appliance Circuits (NAC). Selectable System Sensor, Wheelock, or Gentex strobe synchronization.
  • Built-in Alarm, Trouble, Security, and Supervisory relays.
  • VeriFire® Tools online or offline programming utility. Upload/ Download, save, store, check, compare, and simulate panel databases. Upgrade panel firmware.
  • Autoprogramming and Walk Test reports.
  • Optional universal 636-point DACT.
  • 80-character remote annunciators (up to 32).
  • EIA-485 annunciators, including custom graphics.
  • Printer interface (80-column and 40-column printers).
  • History file with 800-event capacity in nonvolatile memory, plus separate 200-event alarm-only file.
  • Alarm Verification selection per point, with tally.
  • Autoprogramming and Walk Test reports.
  • Presignal/Positive Alarm Sequence (PAS).
  • Silence inhibit and Auto Silence timer options.
  • March time/temporal/California two-stage coding/strobe synchronization.
  • Field-programmable on panel or on PC, with VeriFire Tools program check, compare, simulate.
  • Full QWERTY keypad.
  • Battery charger supports 18 – 200 amp hour batteries.
  • Non-alarm points for lower priority functions.
  • Remote ACK/Signal Silence/System Reset/Drill via monitor modules.
  • Automatic time control functions, with holiday exceptions.
  • Surface Mount Technology (SMT) electronics.
  • Extensive, built-in transient protection.
  • Powerful Boolean logic equations.
  • Support for SCS Series smoke control system in HVAC mode.

Resources

XLS140-2(E): Fire Alarm Control Panel

Reviews

There are no reviews yet.

Be the first to review “Honeywell XLS140-2”