Mircom FA-106R


Conventional Fire Alarm Control Panel. 6 Zones, 2 NAC, Red

Availability: Please Call for Availability

  • Factory New
Brand: Mircom FireAlarm.com Part #: 80843 Category: Manufacturer Part #: FA-106R


The Mircom FA-106 panel is designed for fire alarm systems in small commercial, institutional and industrial occupancies. A slim-line design and a white exterior color offer unobtrusive appearance to compliment any exterior. The FA-106 includes one circuit board providing all the essentials for a complete fire alarm system. Six Class ‘B’ Input circuits and two Class ‘B’ Output circuits (2.0 Amps, 1.25 maximum per circuit) are provided by the FA-106. The Output circuits are protected from shorts by self-restoring circuitry. The FA-106 is equipped with supervision for ground fault detection, battery low level or open wire fault, Input and Output circuit wiring faults and loss of A.C. power. The initiating circuits are supervised for opens and ground faults. The FA-106 has LED indicators for Zone Alarm, Zone Trouble, A.C. On, Battery Fault, Ground Fault, Common Trouble, Signal Trouble and Signal Silences and buttons for Zone Disconnect/ Silence, Buzzer Silence and Reset.


Weight 16 lbs
Dimensions 13.70 × 12.70 × 2.80 in




Production Status



  • Six Class ‘B’ Input circuits
  • Two Class ‘B’ Output circuit (2.0Amps)
  • Meets latest ULC S-527-2011 Standard
  • Signal Silence
  • Audible tones are DIP Switch selectable for Steady and Temporal Code
  • Powerful 3 mA capacity per zone for 2-wire smoke detectors
  • Common alarm Relay contact, Form C, 28 VDC @ 3 AMP (Resistive)
  • Common trouble Relay contact, Form C, 28 VDC @ 3 Amp (Resistive)
  • A.C. ON LED (Green)
  • Zone Alarm LED (Amber)
  • Signal Trouble LED (Amber)
  • Ground Fault LED (Amber)
  • Battery Fault LED (Amber)
  • Alarm Silenced LED (Amber)
  • Common Trouble LED & Silence button
  • Remote Trouble Indicator output
  • Selectable 1 minute Signal silence inhibit
  • Extensive Transient Protection on all circuits
  • White or Red exterior colours
  • All circuits are power limited
  • Fully regulated 24 VDC Auxiliary Power, 250mA maximum
  • All configurations performed by DIP switch



Sx Zone Fire Alarm Unit; FA-106
Mircom – Data Sheet