Discharge Pressure Switch
$685.05
Discharge Pressure Switch
Discharge Pressure Switch Assembly (DPS) is used to provide a latching electrical input to the control panel to confirm a system discharge / actuation. If the ProInert Fire Extinguishing System is actuated via the manual activation button on the top of the actuation solenoid, this input signal will activate the audio-visual alarms for the system.
The Discharge Pressure Switch should be wall mounted adjacent to the container or manifold. Connection to the manifold can be made with the 1/4” BSP connector supplied with the switch.
The switch is operated pneumatically using the agent pressure in the discharge piping network.
Discharge Pressure Switch Assembly (DPS) is used to provide a latching electrical input to the control panel to confirm a system discharge / actuation. If the ProInert Fire Extinguishing System is actuated via the manual activation button on the top of the actuation solenoid, this input signal will activate the audio-visual alarms for the system.
The Discharge Pressure Switch should be wall mounted adjacent to the container or manifold. Connection to the manifold can be made with the 1/4” BSP connector supplied with the switch.
The switch is operated pneumatically using the agent pressure in the discharge piping network.
| Weight | 4 lbs |
|---|---|
| Dimensions | 4.17 × 3.14 × 4.13 in |
| Manufacturer | Fike Corporation |
| Brand | |
| Condition | New |
| Unit of Measurement | EA (Each) |
| Production Status | Active |
| Weight | 4 lbs |
|---|---|
| Dimensions | 4.17 × 3.14 × 4.13 in |
| Manufacturer | Fike Corporation |
| Brand | |
| Condition | New |
| Unit of Measurement | EA (Each) |
| Production Status | Active |
