My Account

  • Duct Smoke Detector Test Station. 2-gang plastic plate c/w key switch, 2 keys. Use with Duct Detector Only

    Cut Sheet: GSA-DTS

     

     

  • Duct Smoke Detector Housing. For Signature Series Detectors only. Use in ducts up to 10 feet wide. Use with SIGA-PS, SIGA-PHS, SIGA-IPHS detector only. Requires SIGA-SB, SIGA-IB, or SIGA-RB Detector Base […]

  • Dual Input Module. Two circuit input module for use with Normally Open Contact devices. Four selectable personality codes (on each circuit) for Alarm latching, or Alarm Delayed latching, or non-latching […]

  • Single Input Module, High Temperature Operation, 1 gang

    Cut Sheet: GSA-CT1HT

     

  • Single Input Module. Single circuit input module for use with Normally Open Contact devices. Four selectable personality codes for Alarm latching, or Alarm Delayed latching, or non-latching monitor or […]

  • Polarity Reversal Relay Module. Reverses polarity of 24 Vdc riser to sound a group of audible bases.

    Cut Sheet: GSA-CRR

     

  • Control Relay Module, DPDT, 7amp @ 120/240VAC, 6 amp @ 24vdc, UL, ULC, CSFM, compatible w/ VS and VM series.

    Cut Sheet: GSA-CRH

     

  • Control Relay Module. Select for either N.O. or N.C. operation. Rated at 2 amps (24Vdc)

    Cut Sheet: GSA-CR

     

  • Dual Input (Riser) Module. Use for switching (selecting) either of two signal or audio input circuits to one signal output circuit.

    Cut Sheet: GSA-CC2

     

  • Single Input (Riser) Module. Features a built-in RING TONE generator; use for switching a single signal or audio circuit, also includes strobe synchronization

    Cut Sheet: GSA-CC1S

     

     

  • Single Input (Riser) Module. Features a built-in RING TONE generator; use for switching a single signal or audio circuit.

    Cut Sheet: GSA-CC1

     

  • Audible (Sounder) Base. Mounts to 4” square (2-1/8 inch deep) North American electrical box.

    Cut Sheet: GSA-AB4G

     

  • Genesis L Series, white housing, no markings, LED strobe light, 15-110 cd, clear lens.

    Cut Sheet: GL1WN-VMC

     

  • Genesis L Series, 4 square trim plate, white, no markings.

    Cut Sheet: E85001-0635 — LED Wall Horns and Strobes

     

  • Genesis L Series, white housing, no markings, horn (temporal or steady, hi/low dB) with LED strobe light, 15-110 cd, clear lens.

    Cut Sheet: GL1WN-HDVMC

     

  • Genesis L Series, white housing, no markings, horn (temporal or steady, hi/low dB).

    Cut Sheet:  GL1WN-HD

     

  • Genesis L Series, single-gang, surface-mount backbox, white.

    Cut Sheet: GL1WN-BB1G

     

  • Genesis L Series, white housing, FIRE markings, LED strobe light, 15-110 cd, clear lens.

    Cut Sheet: GL1WF-VMC

     

  • Genesis L Series, white housing, FIRE markings, horn (temporal or steady, hi/low dB) with LED strobe light, 15-110 cd, clear lens.

    Cut Sheet: GL1WF-HDVMC

     

  • Genesis L Series, white housing, FIRE markings, horn (temporal or steady, hi/low dB).

    Cut Sheet: GL1WF-HD

     

  • Load More
Register New Account
Reset Password