Notifier FSL-751

$438.60

Very Intelligent Early Warning (VIEW®) Laser Smoke Detector

Availability: In Stock
Condition: New
Brand: Notifier
Status: Active
SKU: 214357
Manufacturer Part #: FSL-751
Note: Detector base sold separately.

Description

The Notifier FSL-751 VIEW® Laser Detector is a revolutionary advance in early warning smoke detection technology. The unique design of this laser detector allows smoke detection sensitivity that is up to 50 times higher than present photoelectric technology, when combined with enhanced intelligent sensing algorithms in the Notifier AFP-300, AFP-400, NFS-640, NFS2-640, NFS-320, NFS-3030 or NFS2-3030 control panels. Because of this high sensitivity, the FSL-751 can provide very early warning of slow smoldering fires. Its performance is comparable to present aspiration technology, at a substantially lower installed cost.

The FSL-751 uses an extremely bright laser diode, combined with special lens and mirror optics (U.S. patent pending), to achieve a signal-to-noise ratio that is much higher than traditional photoelectric sensors. In addition, the tightly focused light beam, combined with the intelligent sensing algorithms, allow the system to differentiate between dust and smoke particles. Because of this differentiation, the FSL-751 can be set to extremely high sensitivity, yet can reject false signals caused by larger airborne particles such as dust, lint, and small insects.

The FSL-751 is an intelligent (analog/addressable) detector. Using CLIP mode, up to 99 FSL-751 detectors may be installed per loop. On FlashScan® systems (NFS-640/NFS2- 640/NFS-320/NFS-3030/NFS2-3030), up to 159 addresses are available. The FSL-751 may be mixed in any combination with other Notifier intelligent sensors on the same loop and is quickly installed using the panel auto-program feature. The FSL-751 has dual bi-color LEDs, which blink green in normal operation and illuminate steady red in alarm.

Documents

Description

The Notifier FSL-751 VIEW® Laser Detector is a revolutionary advance in early warning smoke detection technology. The unique design of this laser detector allows smoke detection sensitivity that is up to 50 times higher than present photoelectric technology, when combined with enhanced intelligent sensing algorithms in the Notifier AFP-300, AFP-400, NFS-640, NFS2-640, NFS-320, NFS-3030 or NFS2-3030 control panels. Because of this high sensitivity, the FSL-751 can provide very early warning of slow smoldering fires. Its performance is comparable to present aspiration technology, at a substantially lower installed cost.

The FSL-751 uses an extremely bright laser diode, combined with special lens and mirror optics (U.S. patent pending), to achieve a signal-to-noise ratio that is much higher than traditional photoelectric sensors. In addition, the tightly focused light beam, combined with the intelligent sensing algorithms, allow the system to differentiate between dust and smoke particles. Because of this differentiation, the FSL-751 can be set to extremely high sensitivity, yet can reject false signals caused by larger airborne particles such as dust, lint, and small insects.

The FSL-751 is an intelligent (analog/addressable) detector. Using CLIP mode, up to 99 FSL-751 detectors may be installed per loop. On FlashScan® systems (NFS-640/NFS2- 640/NFS-320/NFS-3030/NFS2-3030), up to 159 addresses are available. The FSL-751 may be mixed in any combination with other Notifier intelligent sensors on the same loop and is quickly installed using the panel auto-program feature. The FSL-751 has dual bi-color LEDs, which blink green in normal operation and illuminate steady red in alarm.

Additional information

Weight 0.20 lbs
Manufacturer

Honeywell

Brand

Condition

New

Unit of Measurement

EA (Each)

Production Status

Active

Reviews

There are no reviews yet.

Be the first to review “Notifier FSL-751”

Attributes

Weight 0.20 lbs
Manufacturer

Honeywell

Brand

Condition

New

Unit of Measurement

EA (Each)

Production Status

Active

Product Features

  • Very Intelligent Early Warning (VIEW®) smoke detection.
  • Advanced laser light source and patented optical design.
  • Sleek low-profile housing (1.66″/42.164 mm height).
  • Sensitivity:
    • 0.03% to 1.00% for CLIP systems
    • 0.02% to 2.00% for all other panels.
  • Rotary, decimal addressing (1-99 on CLIP systems, 1-159 on FlashScan systems).
  • Dual bi-color (red/green) LEDs flash green when Normal and are steady red in Alarm.
  • Compatible with the AFP-300, AFP-400, NFS-640, NFS2- 640, NFS-320, NFS-3030, and NFS2-3030 (all software releases).
  • Dual LED design provides 360° viewing angle.
  • Built-in magnetic test switch, or automatic test commanded from panel.
  • Optional remote, single-gang LED accessory, RA100Z(A).
  • Optional relay, isolator, or sounder bases.

What's Included

Shipping Details

Lead times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. Product availability and pricing may change depending on market conditions. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

This item must be returned within (30) days of the date it was purchased, shipped, delivered, or made ready for pickup. Refunds and returns must be sent via email to [email protected]. Please outline the items being returned, the reason for the return, along with any pictures of additional information about the product. See our complete return policy for more information at: https://firealarm.com/faq/

Testimonials

Rick A.
Dallas, TXI
Read More
"Great service. I received help with exactly what I needed and I received it all in a timely manner."
Charles O.
New Brunswick, NJ
Read More
"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"
Jason G.
Los Angeles, CA
Read More
"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."
Julia S.
Tampa, FL
Read More
"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

Reviews

There are no reviews yet.

Be the first to review “Notifier FSL-751”

Pricing & Availability Details

Lead times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. Product availability and pricing may change depending on market conditions. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Payment Details

You may remit payment via a US-Based Credit Card (CC Authorization Form), Wire Transfer (w/ $30 or $50 fee added to invoice), via PayPal (Or PayPal Pay Later), via Apple or Google Pay, or by mailing us a check. You can also call in with your credit card information at any time: 888-497-0290. All orders are subject to processing time into our main shipment hub.  After placing your order, you will be sent your shipment tracking number after the mandatory processing has been completed.

Return & Cancellation Details

This item must be returned within (30) days of the date it was purchased, shipped, delivered, or made ready for pickup. Refunds and returns must be sent via email to [email protected]. Please outline the items being returned, the reason for the return, along with any pictures of additional information about the product. See our complete return policy for more information at: https://firealarm.com/faq/