Fireray 2000 EExd

Projected beam smoke detector, 33ft. to 330ft. (10m to100m)

Availability: Please call for availability

Request a Quote

Condition: New

Brand: Fireray

Status: Active

SKU: 41117

Manufacturer Part #: 2000 EExd

Secondary Part #: F2000 EExd, 1430130

Replacement: 3000-115

Description

The Fireray® 2000 EExd system is ideally suited to protect large areas with potentially explosive atmospheres, protection against smoking fires can be provided by this beam. Fireray® 2000 EExd includes an infrared transmitter and a receiver, both of which are ATEX-certified for use in Group 2 hazardous areas. There is a separate, safe area, wall-mounted remote low level control unit to allow adjustment and testing from a convenient non-hazardous location.

The product is designed for large enclosures with oil rigs, refineries, ordnance stores, waste water treatment plants, and similar premises. It provides an early warning of smoldering smoke generated fires, some of which may not be picked up by flame detectors installed in many hazardous areas. For installations complying with UL268/NFPA72, the maximum distance of Detector and Reflector from the ceiling must be 10% of the distance between floor and ceiling.

Documents

Description

The Fireray® 2000 EExd system is ideally suited to protect large areas with potentially explosive atmospheres, protection against smoking fires can be provided by this beam. Fireray® 2000 EExd includes an infrared transmitter and a receiver, both of which are ATEX-certified for use in Group 2 hazardous areas. There is a separate, safe area, wall-mounted remote low level control unit to allow adjustment and testing from a convenient non-hazardous location.

The product is designed for large enclosures with oil rigs, refineries, ordnance stores, waste water treatment plants, and similar premises. It provides an early warning of smoldering smoke generated fires, some of which may not be picked up by flame detectors installed in many hazardous areas. For installations complying with UL268/NFPA72, the maximum distance of Detector and Reflector from the ceiling must be 10% of the distance between floor and ceiling.

Additional information

Weight	10.2 lbs
Dimensions	3.50 × 8.50 × 10.30 in
Manufacturer	Halma
Brand	Fireray
Condition	New
Unit of Measurement	EA (Each)
Production Status	Active

Reviews

There are no reviews yet.

Be the first to review “Fireray 2000 EExd”

You must be logged in to post a review.

Fireray 2000 EExd; Explosion Proof Optical Beam Smoke Detector

Fireray - Data Sheet

Fireray 2000 EExd; Hazardous Area Smoke Detector

Fireray - Installation Guide

Attributes

Weight	10.2 lbs
Dimensions	3.50 × 8.50 × 10.30 in
Manufacturer	Halma
Brand	Fireray
Condition	New
Unit of Measurement	EA (Each)
Production Status	Active

Product Features

Separate explosion-proof Transmitter and Receiver units
Signal Strength indicating LED’s
Range 33ft. to 330ft. (10m to 100m)
Easy set up and alignment
Internal test switch
Complies with ATEX and EN54:12
3 selectable fire alarm thresholds: 25%, 35% or 50%
Alarm latching or auto reset
Automatic Gain Control (AGC)
12 VDC or 24 VDC operation
Separate alarm and trouble relay contacts
Ground Level Control unit
Adjustment using wall bracket
Built-in 1/2”/M-20 conduit knock-outs on controller.
- M-10 threaded on TX/RX.

What's Included

Shipping Details

Pricing & Lead Times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

Equipment must be returned within (30) days of the date it was shipped, or made ready for pickup. In order to initiate a return, you must contact our sales team via email at [email protected] to receive an RMA # if it meets all criteria. Products returned after (30) days from our shipment date will be refused. After RMA acceptance, any parts that are returned to FireAlarm.com are subject to a minimum 25% restocking fee. New parts must be returned with original packaging, in un-opened, and uninstalled condition. If not, these parts may be subject to increased restocking fees or refusal. Depending on the circumstances of your order, and if you are a long-time customer of FireAlarm.com, other arrangements can be made. See our complete return policy for more information at: https://firealarm.com/faq/

Testimonials

"Great service. I received help with exactly what I needed and I received it all in a timely manner."

"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"

"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."

"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

Reviews

There are no reviews yet.

Be the first to review “Fireray 2000 EExd”

You must be logged in to post a review.