Altronix ACM4CB


Access Power Controller, 4 PTC Class 2 Relay Outputs, FAI, Board

Availability: Estimated 1 - 3 Weeks

  • Factory New
Brand: Altronix Part #: 17460 Category: Manufacturer Part #: ACM4CB Tag:


Altronix ACM4CB converts one (1) 12 to 24 volt AC or DC input into four (4) independently controlled Class 2 rated PTC protected power-limited auto-resettable outputs rated at 2A each. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The ACM4CB will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. Units are designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the four (4) outputs.


Weight 0.35 lbs
Dimensions 3.36 × 5.12 × 1.25 in

Altronix Corp.





Unit of Measurement

EA (Each)

Production Status


Multi-Output Access Power Controller; ACM4CB


Altronix - Data Sheet

UL Listed Sub-Assembly Access Power Controllers; ACM4 Series


Altronix - Installation Manual