Altronix AL1012ACMCB220


Access Power Controller w/ Power Supply/Charger, 8 PTC Class 2 Relay Outputs, 12VDC @ 10A, FAI, 220VAC, BC400 Enclosure

Availability: Please Call for Availability

  • Factory New
Brand: Altronix Part #: 20966 Category: Manufacturer Part #: AL1012ACMCB220 Tag:


AL1012ACMCB220 converts a nominal 220VAC 50/60Hz input into eight (8) independently controlled 12VDC Fail-Safe and/or Fail-Secure outputs with a total of 10A continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. This unit is designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.


Weight 12.00 lbs
Dimensions 12.25 × 15.50 × 4.50 in

Altronix Corp.





Unit of Measurement

EA (Each)

Production Status


Power Supply/Chargers with Multi-Output Access Power Controllers; ACMCB Series


Altronix - Data Sheet

Access Power Controllers with Power Supplies; ACMCB220 Series


Altronix - Installation Manual