Altronix AL1024ULACMJ


Access Power Controller w/ Power Supply/Charger, 8 Fused Relay Outputs, 24VDC @ 10A, FAI, 115VAC, BC600G Enclosure

Availability: Please Call for Availability

  • Factory New
Brand: Altronix Part #: 20516 Category: Manufacturer Part #: AL1024ULACMJ Tag:


Altronix AL1024ULACMJ converts a 115VAC 60Hz input into eight (8) independently controlled 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 10A continuous supply current. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. This unit is designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock/accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.


Weight 16.10 lbs
Dimensions 18.00 × 14.50 × 4.62 in



Altronix Corp.



Production Status


Unit of Measurement

EA (Each)

Power Supply/Chargers with Multi-Output Access Power Controllers; ACM Series


Altronix - Data Sheet

Access Power Controllers with Power Supplies; ACMJ Series


Altronix - Installation Instructions