Edwards EST SIGA-IS
Intelligent Ionization Detector – UL/ULC Listed
Factory New
Material Obsolete
Description
EST’s Signature Series Model SIGA-IS Intelligent Ionization Smoke Detector gathers analog information from its smoke sensing element and converts it into digital signals. The detector’s on-board microprocessor measures and analyzes these signals. It compares the information to historical readings and time patterns to make an alarm decision. Digital filters remove signal patterns that are not typical of fires. Unwanted alarms are virtually eliminated.
Information
| Weight | 1.00 lbs |
|---|---|
| Manufacturer | |
| Condition | |
| Type | |
| Style | |
| Detectable Medium | |
| Detection Method | |
| Programming | |
| Protocol | |
| Voltage | |
| Voltage Range | |
| Series | |
| Production Status | |
| Brand |
Features
- Integral microprocessor
- Non-volatile memory
- Automatic device mapping
- Electronic addressing
- Environmental compensation
- Intelligent detector
- Wide 0.61% to 1.91%/ft. sensitivity range
- Twenty pre-alarm sensitivity values, set in 5% increments1
- Identification of dirty or defective detectors
- Automatic day/night sensitivity adjustment
- Twin RED/GREEN status LEDs
- Standard, relay, fault isolator, and audible mounting bases
- Designed and manufactured to ISO 9001 standards
Note: Some features described here may not be supported by all control systems,s. Check your control panel’s Installation and Operation Guide for details.
Resources
Intelligent Ionization Smoke Detector; SIGA-IS
EST – Data Sheet
