Edwards EST SIGA-OSCD

$97.05

Intelligent Multisensor Smoke and CO Detector

Availability: Please call for availability
Condition: New
Brand: Edwards, EST
Status: Active
SKU: 26940
Manufacturer Part #: SIGA-OSCD

Description

The Signature Optica Series SIGA-OSCD smoke detector brings advanced optical (photoelectric) sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reliability over the long-haul, while environmental compensation helps reduce maintenance costs.

The SIGA-OSCD provides a combination of optical detection for the early detection of smoke, with the added element of carbon monoxide sensing. The result is a detector that pulls double duty: continually monitoring the environment for signs of fire, as well as its invisible yet deadly companion, carbon monoxide.

Like all Signature Optica Series detectors, the SIGA-OSCD is an intelligent device that gathers analog information from multiple optical sensors, converting this data into digital signals. Utilizing dual optical wavelengths combined with multiple detection angles, the SIGA-OSCD differentiates particles that are not representative of actual smoke. Particle data is input into digital filters which feed a series of ratios removing signal patterns that are typical of nuisance sources, thus reducing unwanted alarms. To make an alarm decision, the detector’s on-board microprocessor measures and analyzes all optical sensor readings and compares this information to preprogrammed settings. The detector also analyzes the smoke sensor independently from the CO sensor to determine whether to initiate a fire alarm, a life safety CO alarm, or both.

Documents

Description

The Signature Optica Series SIGA-OSCD smoke detector brings advanced optical (photoelectric) sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reliability over the long-haul, while environmental compensation helps reduce maintenance costs.

The SIGA-OSCD provides a combination of optical detection for the early detection of smoke, with the added element of carbon monoxide sensing. The result is a detector that pulls double duty: continually monitoring the environment for signs of fire, as well as its invisible yet deadly companion, carbon monoxide.

Like all Signature Optica Series detectors, the SIGA-OSCD is an intelligent device that gathers analog information from multiple optical sensors, converting this data into digital signals. Utilizing dual optical wavelengths combined with multiple detection angles, the SIGA-OSCD differentiates particles that are not representative of actual smoke. Particle data is input into digital filters which feed a series of ratios removing signal patterns that are typical of nuisance sources, thus reducing unwanted alarms. To make an alarm decision, the detector’s on-board microprocessor measures and analyzes all optical sensor readings and compares this information to preprogrammed settings. The detector also analyzes the smoke sensor independently from the CO sensor to determine whether to initiate a fire alarm, a life safety CO alarm, or both.

Additional information

Weight 0.4 lbs
Dimensions 2.30 × 4.30 × 4.30 in
Manufacturer

Carrier

Brand

,

Condition

New

Type

Detector

Style

Plug-In

Construction

Polymer

Detectable Gas

Carbon Monoxide

Detectable Medium

Fire, Gas

Programming

Electronic

Material Qualities

High Impact Resistance

Mounting

Ceiling, Wall

Series

Production Status

Active

Reviews

There are no reviews yet.

Be the first to review “Edwards EST SIGA-OSCD”

Intelligent Multisensor Smoke and CO Detector; SIGA-OSCD

Download

Edwards - Data Sheet

Edwards OPTICA Signature Series

Download

FireAlarm.com - Product Spotlight

Attributes

Weight 0.4 lbs
Dimensions 2.30 × 4.30 × 4.30 in
Manufacturer

Carrier

Brand

,

Condition

New

Type

Detector

Style

Plug-In

Construction

Polymer

Detectable Gas

Carbon Monoxide

Detectable Medium

Fire, Gas

Programming

Electronic

Material Qualities

High Impact Resistance

Mounting

Ceiling, Wall

Series

Production Status

Active

Product Features

  • Multi-criteria optical smoke sensing technology
  • Integrates advanced optical smoke with life safety carbon monoxide detection
  • Wide 0.5 to 4.36 %/ft. (1.6 to 13.6 %/m) smoke obscuration
  • Integrated nuisance rejection reducing unwanted alarms from general cooking particulates
  • Sensor Markings Provide Easy Testing Identification
  • Listed to UL 268 7th edition
  • Uses existing wiring
  • Automatic device mapping
  • Ground fault detection by module
  • Up To 250 Total Signature Addresses Per Loop
  • Two levels of environmental compensation
  • Two levels of dirty detector warning
  • Twenty pre-alarm settings
  • Five sensitivity settings
  • Non-volatile memory
  • Electronic addressing
  • Automatic day/night sensitivity adjustment
  • Bicolor (green/red) status LED
  • Standard, relay, fault isolator, and audible mounting bases

What's Included

Shipping Details

Pricing & Lead Times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

Equipment must be returned within (30) days of the date it was shipped, or made ready for pickup. In order to initiate a return, you must contact our sales team via email at [email protected] to receive an RMA # if it meets all criteria. Products returned after (30) days from our shipment date will be refused. After RMA acceptance, any parts that are returned to FireAlarm.com are subject to a minimum 25% restocking fee. New parts must be returned with original packaging, in un-opened, and uninstalled condition. If not, these parts may be subject to increased restocking fees or refusal. Depending on the circumstances of your order, and if you are a long-time customer of FireAlarm.com, other arrangements can be made. See our complete return policy for more information at: https://firealarm.com/faq/

Testimonials

Rick A.
Dallas, TXI
Read More
"Great service. I received help with exactly what I needed and I received it all in a timely manner."
Charles O.
New Brunswick, NJ
Read More
"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"
Jason G.
Los Angeles, CA
Read More
"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."
Julia S.
Tampa, FL
Read More
"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

Reviews

There are no reviews yet.

Be the first to review “Edwards EST SIGA-OSCD”

You may also like...

4-inch Detector Mounting Base c/w SIGA-TS4 Trim Skirt (Same as SIGA-SB + SIGA-TS4)
Mfr. Part #: SIGA-SB4
SKU: 8217

$20.81

Pricing & Availability Details

Pricing & Lead Times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Payment Details

You may remit payment via a US-Based Credit Card (CC Authorization Form), Wire Transfer (w/ $30 or $50 fee added to invoice), via PayPal (Or PayPal Pay Later), via Apple or Google Pay, or by mailing us a check. You can also call in with your credit card information at any time: 888-497-0290.

Return & Cancellation Details

Equipment must be returned within (30) days of the date it was shipped, or made ready for pickup. In order to initiate a return, you must contact our sales team via email at [email protected] to receive an RMA # if it meets all criteria. Products returned after (30) days from our shipment date will be refused. After RMA acceptance, any parts that are returned to FireAlarm.com are subject to a minimum 25% restocking fee. New parts must be returned with original packaging, in un-opened, and uninstalled condition. If not, these parts may be subject to increased restocking fees or refusal. Depending on the circumstances of your order, and if you are a long-time customer of FireAlarm.com, other arrangements can be made. See our complete return policy for more information at: https://firealarm.com/faq/