Edwards Signaling EG1F-C

Genesis Chime, 24V DC, “FIRE” Marking, White

  • Factory New
Brand: Edwards Signaling FireAlarm.com Part #: 5683 Category: Manufacturer Part #: EG1F-C


The Genesis line of chimes and strobes are audible-visible emergency signaling devices. Protruding no more than one inch from the wall, Genesis chimes and chime-strobes feature textured housings in white or red. Genesis strobes are designed to channel and condition light to produce a highly controllable distribution pattern.

Chime-strobes feature selectable candela output with a switch located on the bottom of the device. The candela setting is visible even after the device is installed.

The strobes are designed to flash at the same rate (synchronize) when used with a compatible synchronization source, such as the EG1-M and EG1M-RM synchronization module, E-FSC and E-FSA fire panels, and EBPS series booster supplies.

Genesis Series chimes 60 strokes per minute when steady voltage is applied, or may be field-configured for temporal output. When installed with a EG1M Signal Master Module, the chime may also be field-configured for coded operation. Chimes may be set for low dB output with a jumper cut that reduces sound output.



Weight 0.4 lbs





Flush, Surface, Wall






Edwards Signaling

Production Status



  • Xenon light source
  • Clear lens
  • White or red housing
  • Low profile design
  • Field selectable candela output via switch
  • 81dB @ 1m/71dB @ 10ft. output
  • Fits standard single gang electrical boxes – no extension ring or trim plate required
  • Operating temperature range: 32°F to 120°F (0°C to 49°C)

Conventional and Addressable Accessories Chimes and Strobes Genesis Series

Edwards Signaling - Product Catalog

Genesis Chime

Genesis Chime - Installation Sheet

Related Products...