Edwards Signaling SD-T36

$12.50

Air Sampling Tube, 36″

Availability: In Stock

  • Factory New
Brand: Edwards Signaling FireAlarm.com Part #: 7208 Categories: , , Manufacturer Part #: SD-T36

Description

SuperDuct detectors continually sample air flow in the HVAC duct and initiate an alarm condition whenever smoke is detected. An alarm is activated when the quantity (percent obscuration) of combustion products in that air sample exceeds the detector’s sensitivity setting.

Air velocity in the duct as low as 100 ft/min. maintains adequate air flow into the sensor smoke chamber through air holes in the air sampling tube and discharges through the exhaust tube. SuperDuct air sampling tubes must be installed with the inlet holes facing the airstream. Sampling tubes may be rotated in 45-degree increments so that air-holes can be aligned to allow the unit to be mounted in virtually any angle relative to the airflow.

The sampling tube may be installed from either the duct side of the assembly or from inside the sensor compartment, as preferred by the installer. (The exhaust tube must be installed from the duct side.) Sampling tubes may be rotated in 45-degree increments so that air-holes can be aligned to allow the unit to be mounted at virtually any angle relative to the air flow.

Information

Weight 3 lbs
Series

Condition

New

Brand

Edwards Signaling

Production Status

Active

Two-wire Duct Smoke Detector SuperDuct Series

Edwards Signaling - Data Sheet

Related Products...