Edwards Signaling SD-T8

$9.91

Air Sampling Tube, 8″

Availability: Estimated 6 Weeks

Condition: New
Brand: Edwards Signaling
Status: Active
SKU: 7216
Manufacturer Part #: SD-T8

Description

SuperDuct detectors continually sample air flow in the HVAC duct and initiate an alarm condition whenever smoke is detected. An alarm is activated when the quantity (percent obscuration) of combustion products in that air sample exceeds the detector’s sensitivity setting.

Air velocity in the duct as low as 100 ft/min. maintains adequate air flow into the sensor smoke chamber through air holes in the air sampling tube and discharges through the exhaust tube. SuperDuct air sampling tubes must be installed with the inlet holes facing the airstream. Sampling tubes may be rotated in 45-degree increments so that air-holes can be aligned to allow the unit to be mounted in virtually any angle relative to the airflow.

The sampling tube may be installed from either the duct side of the assembly or from inside the sensor compartment, as preferred by the installer. (The exhaust tube must be installed from the duct side.) Sampling tubes may be rotated in 45-degree increments so that air-holes can be aligned to allow the unit to be mounted at virtually any angle relative to the air flow.

Additional information

Weight 0.5 lbs
Series

Condition

New

Brand

Production Status

Active

Reviews

There are no reviews yet.

Be the first to review “Edwards Signaling SD-T8”

Two-wire Duct Smoke Detector SuperDuct Series

Download

Edwards Signaling - Data Sheet