Fike 02-10882


Transformer 240VAC

Availability: Estimated 12 days

Condition: New
Brand: Fike
Status: Active
SKU: 71434
Manufacturer Part #: 02-10882


The Supplemental Power Supply (SPS), P/N 10‐2474‐1 or ‐2, mounts onto the Cheetah® Xi or CyberCat® 1016 controller (header P16) and adds 2 A external standby power and 6 A alarm power to the system; thus increasing the total system power output to 4 A standby and 12 A alarm. The SPS circuit board provides three auxiliary power output circuits, battery charging circuit, and dedicated AC power connection. A 120 or 240 V AC power transformer is shipped with the SPS and is mounted within the control panel enclosure onto the press studs located in the backbox.

Additional information

Weight 0.8 lbs

Fike Corporation




Unit of Measurement

EA (Each)

Production Status



AC Power

  • Power transformer (P21): 120 VAC, 60Hz, 2.6 A; or 240 VAC, 50/60Hz, 1.5A
  • 16 AWG THHN wiring minimum
  • 15 A replaceable fuse (F1) for AC overload protection
  • Non‐power‐limited and supervised
  • Removable terminal block

Battery Charging Circuit

  • Sealed lead acid batteries only(P21)
  • Rated for 75 amp‐hour maximum charging capacity
  • 4 A @ 27 VDC maximum charge current
  • 12 A @ 27 VDC maximum supply current
  • Shares a common power bus with the main controller, allowing standby battery power to be distributed between them
  • 15 A replaceable fuse (F2) provides battery with current limiting, short circuit, and overload protection
  • Can be disabled if batteries are not connected
  • Non‐power‐limited and supervised
  • Removable terminal block

Auxiliary Power Circuits

  • Three continuous, regulated auxiliary power outputs (P22)
  • Rated 2 A @ 24‐28 VDC maximum
  • 4 A replaceable fuse (F3/F4/F5) provides short circuit and overload protection
  • Power‐limited and supervised
  • Removable terminal block


There are no reviews yet.

Be the first to review “Fike 02-10882”

Supplemental Power Supply


Fike – Data Sheet