The Backflow Direct Deringer 20 Double Check Valve Assembly is designed to prevent non‐health hazard pollutants from entering the potable water supply system caused by backpressure and/or siphonage conditions.
The Backflow Direct Deringer 20 Double Check Valve uses two independent Dual Action Check modules and two integral resiliently seated shut‐off valves all of which are contained within a single rigid valve housing constructed entirely of 304 stainless steel. Both integral shutoff valves include pre‐wired supervisory tamper switches contained within a weatherproof actuator housing approved for both indoor and outdoor use. Dual action check modules operate as a "poppet style" check under low flow conditions, operate as a "swing style" check under high flow conditions and use replaceable silicone elastomer sealing discs. Assembly test cocks are handle‐less and operate via a tamper resistant actuator. The valve has a single full access service port and cover with an "inline" replaceable elastomer seal, and is serviceable without special tools. It is approved for both horizontal and vertical applications.
The Backflow Direct Deringer 20 Double Check Valve Assembly is designed to prevent non‐health hazard pollutants from entering the potable water supply system caused by backpressure and/or siphonage conditions.
The Backflow Direct Deringer 20 Double Check Valve uses two independent Dual Action Check modules and two integral resiliently seated shut‐off valves all of which are contained within a single rigid valve housing constructed entirely of 304 stainless steel. Both integral shutoff valves include pre‐wired supervisory tamper switches contained within a weatherproof actuator housing approved for both indoor and outdoor use. Dual action check modules operate as a “poppet style” check under low flow conditions, operate as a “swing style” check under high flow conditions and use replaceable silicone elastomer sealing discs. Assembly test cocks are handle‐less and operate via a tamper resistant actuator. The valve has a single full access service port and cover with an “inline” replaceable elastomer seal, and is serviceable without special tools. It is approved for both horizontal and vertical applications.
| Weight | 40 lbs |
|---|---|
| Dimensions | 18.70 × 10.30 × 11.00 in |
| Manufacturer | Fike Corporation |
| Brand | |
| Condition | New |
| Unit of Measurement | EA (Each) |
| Production Status | Active |
| Weight | 40 lbs |
|---|---|
| Dimensions | 18.70 × 10.30 × 11.00 in |
| Manufacturer | Fike Corporation |
| Brand | |
| Condition | New |
| Unit of Measurement | EA (Each) |
| Production Status | Active |
