Fike 20-1411


Outdoor Wall-Mount Speaker/Strobe, White, Plain, with Weatherproof Back Box, System Sensor

Availability: Estimated 10 days

Condition: New
Brand: Fike
Status: Active
SKU: 141945
Manufacturer Part #: 20-1411
Secondary Part #: SPSWK-P


SpectrAlert Advance strobes and horn strobes shall mount to a standard 4 × 4 × 1½-inch back box, 4-inch octagon back box, or double-gang back box. Two-wire products shall also mount to a single-gang 2 × 4 × 17⁄8-inch back box. SpectrAlert Advance speaker strobes shall mount to a 4 x 4 x 21/8-inch back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit wiring and amplifier wiring shall terminate at the universal mounting plate.

Also,SpectrAlert Advance products, when used with the Sync•Circuit™ Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt-rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor SpectrAlert Advance products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or full-wave rectified unfiltered power supply. Strobes, horn strobes, and speaker strobes shall have field-selectable candela settings, including 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185.

Additional information

Weight 0.4 lbs
Dimensions 6.00 × 5.00 × 2.80 in

Fike Corporation




Unit of Measurement

EA (Each)

Production Status


Field-Selectable Emergency Communications Devices


System Sensor - Data Sheet