This product has been replaced by

Fike 20-2009

Outdoor Wall-Mount Strobe, White, Standard Candela, System Sensor

Manufacturer Part #: 20-2009

Fike 20-2009

$68.08

Outdoor Wall-Mount Strobe, White, Standard Candela, System Sensor

Availability: Estimated 10 days

Condition: New

Brand: Fike

Status: Active

SKU: 141725

Manufacturer Part #: 20-2009

Secondary Part #: SWK

Description

SpectrAlert Advance outdoor horns, strobes, and horn strobes shall mount to a weatherproof back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance products, when used with the Sync•Circuit™ Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt-rated notification appliance circuit outputs shall operate between 9 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 17 and 33 volts. Outdoor SpectrAlert Advance products shall operate between −40 and 151 degrees Fahrenheit from a regulated DC or full-wave rectified unfiltered power supply. Strobes and horn strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185.

Documents

Description

SpectrAlert Advance outdoor horns, strobes, and horn strobes shall mount to a weatherproof back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance products, when used with the Sync•Circuit™ Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt-rated notification appliance circuit outputs shall operate between 9 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 17 and 33 volts. Outdoor SpectrAlert Advance products shall operate between −40 and 151 degrees Fahrenheit from a regulated DC or full-wave rectified unfiltered power supply. Strobes and horn strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185.

Additional information

Weight	0.4 lbs
Dimensions	5.60 × 4.70 × 2.50 in
Manufacturer	Fike Corporation
Brand	Fike
Condition	New
Unit of Measurement	EA (Each)
Production Status	Active

Outdoor SelectableOutput Horns, Strobes, and Horn Strobes for Wall Applications

System Sensor - Data Sheet

Attributes

Weight	0.4 lbs
Dimensions	5.60 × 4.70 × 2.50 in
Manufacturer	Fike Corporation
Brand	Fike
Condition	New
Unit of Measurement	EA (Each)
Production Status	Active

Product Features

Weatherproof per NEMA 4X, IP56
Listed to UL 1638 (strobe) and UL 464 (horn)
Compatible with System Sensor synchronization protocol and legacy SpectrAlert products
Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185
Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
Rotary switch for horn tone and three volume selections
Horn rated at 88+ dBA at 16 volts
Rated from –40°F to 151°F
Universal mounting plate with an onboard shorting spring that tests wiring continuity before devices are installed
Plug-in design with minimal intrusion into the back box
Tamper-resistant construction
Listed for ceiling or wall mounting

What's Included

Shipping Details

Pricing & Lead Times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

Equipment must be returned within (30) days of the date it was shipped, or made ready for pickup. In order to initiate a return, you must contact our sales team via email at [email protected] to receive an RMA # if it meets all criteria. Products returned after (30) days from our shipment date will be refused. After RMA acceptance, any parts that are returned to FireAlarm.com are subject to a minimum 25% restocking fee. New parts must be returned with original packaging, in un-opened, and uninstalled condition. If not, these parts may be subject to increased restocking fees or refusal. Depending on the circumstances of your order, and if you are a long-time customer of FireAlarm.com, other arrangements can be made. See our complete return policy for more information at: https://firealarm.com/faq/

Testimonials

"Great service. I received help with exactly what I needed and I received it all in a timely manner."

"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"

"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."

"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

You may also like...