Fireye 85IRF4A-1QDWR


Phoenix Series II Scanner, Selectable FFRT – Infra-red, with quick disconnect. Use 59-546-xx cable. For use with EDC1, EDC2, MEDC2, YB110DC, or YB230DC direct coupled amplifiers, uses 60-2692, 60-2919 mounting flange

Availability: Please Call for Availability

Condition: New
Brand: Fireye
Status: Active
SKU: 180772
Manufacturer Part #: 85IRF4A-1QDWR


The Fireye Phoenix Series 2 type 85UVF/IRF flame scanners are microprocessor-based devices utilizing a solid-state flame detection sensor. The Phoenix flame scanners incorporate an internal flame relay with automatically set ON/OFF thresholds, thereby eliminating the need for a remote flame amplifier or flame switch. Phoenix scanners detect the amplitude of the modulations (the flame “flicker”) that occur within the targeted flame, over a wide frequency. During the scanner setup procedure, the amplitudes of the target flame are automatically stored by the flame scanner, together with optimum ON/OFF criteria. The appropriate sensor gain is automatically selected. Phoenix scanners incorporate full self-diagnostics and electronic self-checking.

The Phoenix 85UVF/IRF is available in multiple models differentiated by spectral range, levels of hazardous area certifications and agency approvals. Refer to Table 1 on page 3 for an overview of model numbers versus product certifications. Versions with stainless steel housings are also available.

The Phoenix 85UVF/IRF flame scanner is powered by 24Vdc. Electrical connection is via an 8-pin electrical quick-disconnect (QD). An analog 4 to 20mA output of flame strength is standard.

Additional information

Weight 4.4 lbs





Unit of Measurement

EA (Each)

Production Status


Listings & Approvals



There are no reviews yet.

Be the first to review “Fireye 85IRF4A-1QDWR”

Type 85UVF/IRF Integrated Flame Scanner with Internal Flame Relay


Fireye - Manual