Honeywell HPF-PS6E


6.0 A, 240 VAC remote charger power supply in a lockable, metal enclosure, red

Availability: In Stock

Condition: New
Brand: Honeywell
Status: Active
SKU: 70573
Manufacturer Part #: HPF-PS6E


The PS Series is a remote power supply line from Honeywell Power Products and is a direct replacement for the HPF-24S6/8. The PS Series provides auxiliary power, constant or resettable, suited for detectors, annunciators, door holders, and other fire alarm system peripherals. The PS Series cabinet can hold two 7 AH or 18 AH batteries and can charge up to 33 AH batteries in a separate cabinet. The HPF-PS6E is a model rated for 240V operation.

Additional information

Weight 10 lbs
Dimensions 20 × 14.50 × 3.50 in



Production Status



  • Up to five (6 amp model) or seven (10 amp model) independently-configurable, powerlimited output circuits for: –Class B and/or Class A NACs –Class B and/or Class A resettable or nonresettable 24V auxiliary power –door holder power
  • Converts from Class B to Class A wiring without losing any outputs using the ZNACPS converter card (sold separately)
  • Optimal for powering four-wire smoke detectors, annunciators, and other system peripherals requiring regulated power
  • Optional addressable control, monitor, and relay modules and power-supervision relay (EOLR-1)
  • Configurable for ANSI® Temporal 3 or Temporal 4 coded output
  • UL-Listed NAC synchronization using System Sensor®, Wheelock®, Gentex®, or AMSECO® appliances
  • Synchronization can be triggered from FACP NAC/remote sync outputs, cascaded power supply, or a control module, single or multi, which may be housed within the power supply cabinet
  • Ability to cascade up to four power supplies
  • Two (6 amp model) or three (10 amp model) fully-isolated input/control circuits which can be programmed to any output
  • Two Form C normally-closed trouble relays for AC Trouble and General Trouble
  • 6 or 10 amp full load output, respectively, with 3 A maximum/circuit • Individual NAC power and trouble LEDs for diagnostic efficiency
  • Trouble history mode for diagnostic support
  • Wide range end-of-line supervision value (normal: 2-27K ohms)
  • Selectable earth fault detection (enable or disable)
  • AC trouble report delay timer
  • Completely configurable via onboard DIP switches, no extra software required
  • Self-contained in compact, locking cabinet constructed of heavy gauge steel with a corrosion-resistant powder coat chip and scratch-resistant finish
  • Cabinet designed with ten double knockouts and a removable door for ease of installation and wiring
  • Includes integral battery charger capable of charging up to 33 AH batteries
  • Cabinet can house two 7 AH or 18 AH batteries
  • Battery charger may be disabled via DIP switch for applications requiring larger batteries and external battery charger
  • Removable terminal blocks accommodate up to 12 AWG (3.1mm2) wire
  • Works with any UL 864 FACP which utilizes an industry-standard reverse-polarity notification circuit


There are no reviews yet.

Be the first to review “Honeywell HPF-PS6E”



Honeywell - Data Sheet