This product has been replaced by

Lenel LNL-1320-S3

Dual Reader Interface Module Series 3

Manufacturer Part #: LNL-1320-S3

Lenel LNL-1320-S3

$1,172.56

Dual Reader Interface Module Series 3

Availability: Please Call for Availability

Condition: New

Brand: Lenel

Status: Active

SKU: 71778

Manufacturer Part #: LNL-1320-S3

Secondary Part #: LNL-1320-S3B

Description

LenelS2TM offers a Dual Reader Interface (DRI) module for access control solutions. Most access control card readers, keypads, or readers with keypads that use standard Wiegand Data1/Data0 or Clock/Data communication are supported, as are those that support the bidirectional RS-485 Open Supervised Device Protocol (OSDP™). Lock, unlock, and facility code offline access modes are supported on all readers connected to the DRI. Each DRI supports up to 16 different card formats as well as issue codes for both magnetic and Wiegand card formats. The DRI provides a vital link between the Intelligent System Controller (ISC) and the card reader attached to the interface. As many as 32 DRI modules can be multi-dropped using RS485 2-wire or 4-wire communication up to 4,000 feet per port away from the ISC. Each DRI module is individually addressed for increased reporting capabilities with OnGuard® access control software applications. The DRI includes eight inputs that support normally open, normally closed, supervised, and non-supervised circuits. In addition, six output relays support fail-safe or fail-secure operation.

Documents

Description

LenelS2TM offers a Dual Reader Interface (DRI) module for access control solutions. Most access control card readers, keypads, or readers with keypads that use standard Wiegand Data1/Data0 or Clock/Data communication are supported, as are those that support the bidirectional RS-485 Open Supervised Device Protocol (OSDP™). Lock, unlock, and facility code offline access modes are supported on all readers connected to the DRI. Each DRI supports up to 16 different card formats as well as issue codes for both magnetic and Wiegand card formats.

The DRI provides a vital link between the Intelligent System Controller (ISC) and the card reader attached to the interface. As many as 32 DRI modules can be multi-dropped using RS485 2-wire or 4-wire communication up to 4,000 feet per port away from the ISC. Each DRI module is individually addressed for increased reporting capabilities with OnGuard® access control software applications. The DRI includes eight inputs that support normally open, normally closed, supervised, and non-supervised circuits. In addition, six output relays support fail-safe or fail-secure operation.

Additional information

Weight	0.4 lbs
Brand	Lenel
Condition	New
Production Status	Active

Reviews

There are no reviews yet.

Be the first to review “Lenel LNL-1320-S3”

You must be logged in to post a review.

Attributes

Weight	0.4 lbs
Brand	Lenel
Condition	New
Production Status	Active

Product Features

12 or 24 VDC power supply
Supports Data1/Data0, Clock/Data, Supervised and Unsupervised F2F and OSDP-compatible RS-485 readers and keypads
Supports Open Supervised Device Protocol (OSDP) readers, including biometric template transfer and Secure Channel encryption
Downloadable firmware
Six Form-C 5 A at 28 VDC relay outputs
Up to 16 different formats
Issue code support for magnetic and Wiegand formats
Door contact supervision (open/closed)
REX push-button monitor
Strike control output
Bicolor reader status LED support and 2-wire LED support
Beeper control
Dedicated tamper and power failure circuits
Support for offline reader access mode
On-board jumpers for termination
On-board regulator allows 12 VDC reader support from 24 VDC power source
DIP switch-selectable addressing
Advanced Encryption Standard (AES) 128-bit algorithm for communications to ISC
Supports Schlage® Handkey® template download
Compatible with current and previous versions of OnGuard

What's Included

Shipping Details

Pricing & Lead Times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

Equipment must be returned within (30) days of the date it was shipped, or made ready for pickup. In order to initiate a return, you must contact our sales team via email at [email protected] to receive an RMA # if it meets all criteria. Products returned after (30) days from our shipment date will be refused. After RMA acceptance, any parts that are returned to FireAlarm.com are subject to a minimum 25% restocking fee. New parts must be returned with original packaging, in un-opened, and uninstalled condition. If not, these parts may be subject to increased restocking fees or refusal. Depending on the circumstances of your order, and if you are a long-time customer of FireAlarm.com, other arrangements can be made. See our complete return policy for more information at: https://firealarm.com/faq/

Testimonials

"Great service. I received help with exactly what I needed and I received it all in a timely manner."

"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"

"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."

"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

Reviews

There are no reviews yet.

Be the first to review “Lenel LNL-1320-S3”

You must be logged in to post a review.

You may also like...