Mircom FX-3318

$2,962.95

Control Panel Fire Alarm w/Dact Flush or Surface

Availability: Estimated 6 Weeks

Condition: New
Brand: Mircom
Status: Active
SKU: 71837
Manufacturer Part #: FX-3318

Description

Mircom’s FX-3318 Addressable Fire Alarm Control Panel is an intelligent addressable multi-zoned panel with exceptional value while not compromising the Mircom features needed to satisfy small to medium jobs. The FX-3318 is shipped pre-assembled with all main components including: main board, power supply, transformer, and main display in a red enclosure. A built-in dialer is included to communicate panel status to the remote central monitoring station using 2 dedicated phone lines. Both SIA and Contact ID are supported Up to 7 annunciators can be added with enclosure options in red, white or NEW stainless steel. It has one built in signaling line circuit (SLC). With Mircom’s Advanced Protocol (AP) a superior group polling method as well as an interrupt feature, allows a faster response to an alarm. The AP or Advanced Protocol allows for greater system capacity with support for up to 318 devices in AP mode and offers legacy CLIP support of up to 198 devices. FX-3318 has four Power Limited Class B (Style Y) or Class A (Style Z) NAC circuits.

Additional information

Weight 16 lbs
Manufacturer

Mircom Technologies Ltd.

Brand

Condition

New

Type

Control Panel

Style

Addressable

Color

N/A

Series

Production Status

Active

Compatibility

Features

  • One onboard SLC communication circuit
  • Supports up to 318 intelligent devices in AP mode
  • Legacy Clip support of up to 198 devices
  • Built-in Dialer Module for remote monitoring
  • 4 x 20 LCD with 80 characters
  • Supports up to 7 annunciators
  • Optional City Tie/Polarity Reversal module for central station monitoring & field installable
  • Four Power Limited Class B (Style Y) or Class A (Style Z) NAC circuits (max 1.5 Amps each – 5.0 amps total).
  • Auxiliary power is available in the form of 24V FWR unfiltered and unsupervised, 24VDC filtered and regulated, and resettable auxiliary power supply.
  • Positive Alarm Sequence (PAS)- provides an alarm delay of up to 180 seconds if an alarm is acknowledged at the control panel within 15 seconds. This action provides the responding personnel time to investigate an alarm before evacuating a building.
  • Supports sync strobe protocols from major manufacturers.
  • Two-stage, alarm verification, water-flow retard and positive alarm sequence operations.
  • Configurable Signal Silence Inhibit, Auto Signal Silence, and One-Man Walk Test.
  • Beam Detector and Duct Detector AP types
  • USB port on core board for simple programming and firmware upgrade
  • Common configurator for FX-3500 and FX-3318
  • Full Windows 10 compatibility
  • CO-Photo-Heat Combinations

Resources

Single Loop Intelligent Fire Alarm Control Panel; FX-3318
Mircom – Data Sheet