Notifier AMPS-24


Addressable Power Supply, 120 VAC (NFS-3030/NFS2-3030)

Availability: In Stock

Condition: New
Brand: Notifier
Status: Active
SKU: 4713
Manufacturer Part #: AMPS-24


AMPS-24 Notifier is an addressable power supply and battery charger with up to three 24 VDC outputs. It operates in either FlashScan® or CLIP (Classic Loop Interface Protocol) mode with the NFS-3030/NFS2-3030 Fire Alarm Control Panel (FACP). It can also be used as the primary power supply for the NCA-2 Network Control Annunciator.

Additional information

Weight 4.25 lbs

Honeywell International

Unit of Measurement

EA (Each)





Production Status



  • Addressable by NFS-3030/NFS2-3030 FACP.
  • Selectable charging current charges 7 AH to 200 AH batteries.
  • Isolated Signaling Line Circuit (SLC) interface.
  • Trouble bus input for use with normally-open dry contacts or open-collector circuit.
  • USB Type B connector for programming installation parameters.
  • Brownout detection.
  • Battery/battery charger supervision.
  • Secondary Power Auxiliary Outputs: 24V @ 0.5A and 5V @ 0.15A.
  • AC loss detection and AC loss delay reporting.
  • Mounts in a CAB-4 Series enclosure, EQ Cabinet Series enclosure, BB-25, BB-100, or BB-200 Battery Backbox.
  • AUX 24V – provides filtered power-limited power for additional components. Refer to table above for configuration/ current information.
  • Secondary power (battery) charging circuit: Current-limited, sealed lead-acid battery charger which will charge 7 to 200 AH batteries. Selectable charging current: 1.0 A, 2.0 A or 5.0 A.
  • Secondary power auxiliary outputs.
  • Wire sizes: 10 AWG (5.26 mm²) to 22 AWG (0.326 mm²).
  • Battery fuse (F2): 15 A, fast-acting.
  • Shipping Weight: 4.25 lb


There are no reviews yet.

Be the first to review “Notifier AMPS-24”

Power Supply for the NFS-3030, NFS2-3030 and NCA-2


Notifier - Data Sheet