Notifier FMM-1A

Monitor module, ULC Listed

Condition: New
Brand: Notifier
Status: Active
SKU: 46811
Manufacturer Part #: FMM-1A


Four different monitor modules are available for Notifier’s intelligent control panels for a variety of applications. Monitor modules supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors (FZM-1(A)).

FMM-1(A) is a standard-sized module (typically mounts to a 4″ [10.16 cm] square box) that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices.

The FMM-1(A) Monitor Module is intended for use in intelligent, two-wire systems, where the individual address of each module is selected using the built-in rotary switches. It provides either a two-wire or four-wire fault-tolerant Initiating Device Circuit (IDC) for normally-open-contact fire alarm and supervisory devices. The module has a panel-controlled LED indicator. The FMM-1(A) can be used to replace MMX-1(A) modules in existing systems.

Additional information

Weight 0.2 lbs

Rotary Dials




Production Status



  • Built-in type identification automatically identifies this device as a monitor module to the control panel.
  • Powered directly by two-wire SLC loop. No additional power required.
  • High noise (EMF/RFI) immunity.
  • SEMS screws with clamping plates for ease of wiring.
  • Direct-dial entry of address: 01 – 159 on FlashScan loops; 01 – 99 on CLIP loops.
  • LED flashes green during normal operation (programmable option) and latches on steady red to indicate alarm.


There are no reviews yet.

Be the first to review “Notifier FMM-1A”

Monitor Modules with FlashScan


Notifier - Data Sheet