Notifier HS-NCM-W-2
$3,037.49
High-Speed Network Communications Module, twisted-pair wire interface
Lead Time: 6-8 Business Days
Factory New
Description
The High-Speed Network Communications Module (HS-NCM) provides NOTIFIER’s NFS-320, NFS-640, NFS2-640, NFS-3030, and NFS2-3030 Fire Alarm Control Panels, NCA and NCA-2 Network Control Annunciators, and DVC Digital Voice Command with a means to connect to High-Speed NOTI•FIRE•NET (NFN).
Each HS-NCM can accommodate up to two node addresses. For example, one HS-NCM can provide network communication for both an NFS2-640 and an NCA-2.
When not connected to a fire alarm panel, the HS-NCM defaults to repeater mode and can be used to boost signal distances or to pass data transmissions between two differently configured network segments when wire and fiber co-exist on a network.
Note: Correct configuration is dependent on network design; refer to the High-Speed NFN Manual, P/N 54013.
Information
Weight | 1.00 lbs |
---|---|
Series | |
Condition |
Features
- Supports twisted-pair wire medium
- NFPA Style 4 (Class B) operation or NFPA Style 7 (Class A) operation
- Transformer coupling provides electrical isolation between nodes
- Pluggable terminal wiring with strain relief
- Pluggable service connector (feeds signal directly through) in the event that power must be removed from the node
- 12 Mb transmission rate
- Data is regenerated at each node
- Two network ports to allow simultaneous connection to fire alarm control panel and to programming computer
- Enables software and database upload/download over the High-Speed NFN
- Up to 3,000 feet (914.4 m) between nodes in a point-to-point fashion (actual distance varies with wire quality)
Resources
HS-NCM High-Speed Network Communications Modules
Product Installation Document: High-Speed Network Communications Module
Instruction Manual: Network System Interface
You must be logged in to post a review.
Reviews
There are no reviews yet.