Notifier XP10M


Transponder Monitor Module, 10 Circuits Fire Alarm

Availability: Please Call for Lead Time

  • Factory New
Brand: Notifier Part #: 80907 Category: Manufacturer Part #: XP10M Tags: ,


The XP10-M ten-input monitor module is an interface between a control panel and normally open contact devices in intelligent alarm systems such as pull stations, security contacts, or flow switches. The first address on the XP10-M is set from 01 to 150 and the remaining modules are automatically assigned to the next nine higher addresses. Provisions are included for disabling a maximum of two unused addresses. The supervised state (normal, open, or short) of the monitored device is sent back to the panel. A common SLC input is used for all modules, and the initiating device loops share a common supervisory supply and ground — otherwise each monitor operates independently from the others. Each XP10-M module has panel controlled green LED indicators. The panel can cause the LEDs to blink, latch on, or latch off.


Weight 0.76 lbs
Dimensions 6.80 × 5.80 × 1.25 in



  • Listed to UL Standard 864, 9th edition.
  • Ten addressable Class B or five addressable Class A initiating device circuits.
  • Removable 12 AWG (3.31 mm²) to 18 AWG (0.821 mm²) plug-in terminal blocks.
  • Status indicators for each point.
  • Unused addresses may be disabled.
  • Rotary address switches.
  • Class A or Class B operation.
  • FlashScan® or CLIP operation.
  • Flexible mounting options.
  • Mounting hardware included.


XP10-M(A); Ten-Input Monitor Module
Notifier – Data Sheet


There are no reviews yet.

Be the first to review “Notifier XP10M”