Potter PAD100-ZM


Conventional Zone Module

Availability: Estimated 6 - 8 Business Days

  • Factory New
Brand: Potter FireAlarm.com Part #: 41520 Categories: , Manufacturer Part #: PAD100-ZMSecondary Part #: 3992706


The PAD100-ZM module uses one (1) address on an SLC Loop when monitoring two (2) Class B or one (1) Class A circuit. The module requires and supervises a 24VDC auxiliary power connection. The 24VDC power source must be either a potter IPA series addressable panel, or a Potter PSN series power supply. The IDC may be wired Class B or Class A which is selectable by an on board DIP switch. The PAD100-ZM employs one red LED to indicate the module’s status. In normal condition, the LED flashes when the device is being polled by the control panel. When a device is activated, the LED will flash at a fast rate.


Weight 1.00 lbs




Terminal Type




  • Compatible with conventional 2-wire smoke detectors
  • IDC can be wired One (1) Class A or Two (2) Class B
  • Monitors presence of 24VDC Aux Power
  • SLC Class A, Class X & Class B
  • Mounts in a standard 4” or double gang box
  • Wiring terminals accessible when mounted in box
  • All wiring terminals accept 22 to 12 AWG
  • UUKL Listed for Smoke Control

PAD100-ZM Conventional Zone Module


Potter - Data Sheet

Installation Manual; PAD100-ZM Zone Module


Potter - Installation Manual

Related Products...