$3,111.00
Aspirating detection is now a recognised solution for many different fire detection applications. ProPoint PLUS provides up to four separate detectors within a common aspirator enclosure and therefore provides four individually identifiable areas of detection per aspirator.
Each of the four plug-in ‘Scatter Chamber Detectors’ (SCD)’s detector modules can be either ‘optical’ only or combined ‘optical/enhanced CO’ detectors, the CO sensor is only suitable for small room applications. Independent and integrated alarm decision making through the use of complex algorithms extend the range of particle detection, confirm genuine alarms and reduce unwanted alarms.
Installation, configuration and commissioning of ProPoint PLUS detectors is very simple and installer friendly.
Configuration to either Class A, Class B or Class C sensitivity options is achieved through a multi-language, multi-function LCD display without the need for a laptop connection.
Detector set up allows the installer to configure the detector sensitivity to an equivalent setting, as a known number of point type smoke detectors for each Class A, Class B and Class C system. This ensures the system specifier, designer, installer and commissioning engineer configure the ProPoint PLUS SCD’s to the correct sensitivity for the particular application.
Aspirator fan speed and airflow configuration is a also a very simple process allowing ProPoint PLUS aspirating detectors to be installed in a variety of applications with short and relatively long pipe runs.
Aspirating detection is now a recognised solution for many different fire detection applications. ProPoint PLUS provides up to four separate detectors within a common aspirator enclosure and therefore provides four individually identifiable areas of detection per aspirator.
Each of the four plug-in ‘Scatter Chamber Detectors’ (SCD)’s detector modules can be either ‘optical’ only or combined ‘optical/enhanced CO’ detectors, the CO sensor is only suitable for small room applications. Independent and integrated alarm decision making through the use of complex algorithms extend the range of particle detection, confirm genuine alarms and reduce unwanted alarms.
Installation, configuration and commissioning of ProPoint PLUS detectors is very simple and installer friendly.
Configuration to either Class A, Class B or Class C sensitivity options is achieved through a multi-language, multi-function LCD display without the need for a laptop connection.
Detector set up allows the installer to configure the detector sensitivity to an equivalent setting, as a known number of point type smoke detectors for each Class A, Class B and Class C system. This ensures the system specifier, designer, installer and commissioning engineer configure the ProPoint PLUS SCD’s to the correct sensitivity for the particular application.
Aspirator fan speed and airflow configuration is a also a very simple process allowing ProPoint PLUS aspirating detectors to be installed in a variety of applications with short and relatively long pipe runs.
| Weight | 6.6 lbs |
|---|---|
| Dimensions | 14.96 × 9.84 × 5.39 in |
| Manufacturer | Protec Fire Detection PLC |
| Brand | Safe Fire Detection |
| Condition | New |
| Unit of Measurement | EA (Each) |
| Production Status | Active |
| Listings & Approvals | CE, CSFM, cUL, FM Approved, UL |
| Supply Voltage | 21 – 29VDC |
| IP Rating | IP20 |
| Pipe ID | 3/4” or 25mm |
| Alarm Indications | Pre-alarm warning and Fire per pipe |
| Coverage | Up to 54,000sq.ft. |
| Sample Points | Up to 60 |
| Relevant Standard | EN54 Part 17 & 20, AS 7240 Part 20 |
| Weight | 6.6 lbs |
|---|---|
| Dimensions | 14.96 × 9.84 × 5.39 in |
| Manufacturer | Protec Fire Detection PLC |
| Brand | Safe Fire Detection |
| Condition | New |
| Unit of Measurement | EA (Each) |
| Production Status | Active |
| Listings & Approvals | CE, CSFM, cUL, FM Approved, UL |
| Supply Voltage | 21 – 29VDC |
| IP Rating | IP20 |
| Pipe ID | 3/4” or 25mm |
| Alarm Indications | Pre-alarm warning and Fire per pipe |
| Coverage | Up to 54,000sq.ft. |
| Sample Points | Up to 60 |
| Relevant Standard | EN54 Part 17 & 20, AS 7240 Part 20 |
• 1 – 4 Individual detectors per aspirator(providing up to 4 separately identifiable areas)
• High performance optical ‘Scatter Chamber Detectors’ (SCD)
• Multiple language, multi-function LCD display
• Simple install and commission process generally without the need for a laptop connection
• Built-In algorithm to reduce unwanted alarms
• Airflow monitoring per pipe
