Sale!

Siemens ACM-1

$8,813.20 $8,012.00

The ACM-1 is an MXLV module which acts as the audio
system master controller. It controls all audio related
functions.
The ACM-1 includes a local audible and on-board
amber LED for indication of ACM troubles. These
troubles will also be indicated on the MKB-2 display. An
on-board amber LED is also supplied for monitoring
MXL network polling.
The ACM-1 has a microprocessor controlled signal
generator with a complete set of available tones, selectable
using MXL’s AccuLINK system programming software.
The tones are fully supervised and a connector is
provided for the addition of a BTC-1 backup tone
generator when required. Tones available are:
Slow Whoop
900 Hz
900 Hz @ 120 PPM
900 Hz @ 30 PPM
Chime
4-4-4
California Code
Yeow
Yelp
Wail
Hi/Lo
2 KHz
Temporal Code 3
System Coded Audibles
The ACM-1 also includes a microphone preamplifier for
use with the MMM-1 microphone master module. The
preamplifier uses an automatic gain control circuit to
assure distortion free live voice announcements. A
backup pre-amplifier is supplied with automatic transfer
if the pre-amp fails. When the microphone key switch is
pressed, the ACM-1 can send the adjustable length preannounce
tone to selected speaker circuits. The ACM-1
also supervises the microphone, its cable and the
keyswitch.
The ACM-1 acts as the controller for all VSM-1 switch
modules, VFM-1 fan control modules and VLM-1 annunciator
modules. It also controls the warden’s page
functions as routed from the TMM-1 telephone master
module to the paging audio channel. It includes a
Sonalert® for audible keystroke feedback and
firefighter’s call-in signal. The ACM-1 mounts on the rear
of the MKB-2 display/keyboard module in the voice
command console and occupies one MXL network
address. The address is set using a DIP switch on the
unit itself. One ACM-1 is required in each system.
This equipment is approved for operation over the
temperature range of 0°C to 49°C.

Available!

SKU: ACM-1 Categories: ,

Description

The ACM-1 is an MXLV module which acts as the audio
system master controller. It controls all audio related
functions.
The ACM-1 includes a local audible and on-board
amber LED for indication of ACM troubles. These
troubles will also be indicated on the MKB-2 display. An
on-board amber LED is also supplied for monitoring
MXL network polling.
The ACM-1 has a microprocessor controlled signal
generator with a complete set of available tones, selectable
using MXL’s AccuLINK system programming software.
The tones are fully supervised and a connector is
provided for the addition of a BTC-1 backup tone
generator when required. Tones available are:
Slow Whoop
900 Hz
900 Hz @ 120 PPM
900 Hz @ 30 PPM
Chime
4-4-4
California Code
Yeow
Yelp
Wail
Hi/Lo
2 KHz
Temporal Code 3
System Coded Audibles
The ACM-1 also includes a microphone preamplifier for
use with the MMM-1 microphone master module. The
preamplifier uses an automatic gain control circuit to
assure distortion free live voice announcements. A
backup pre-amplifier is supplied with automatic transfer
if the pre-amp fails. When the microphone key switch is
pressed, the ACM-1 can send the adjustable length preannounce
tone to selected speaker circuits. The ACM-1
also supervises the microphone, its cable and the
keyswitch.
The ACM-1 acts as the controller for all VSM-1 switch
modules, VFM-1 fan control modules and VLM-1 annunciator
modules. It also controls the warden’s page
functions as routed from the TMM-1 telephone master
module to the paging audio channel. It includes a
Sonalert® for audible keystroke feedback and
firefighter’s call-in signal. The ACM-1 mounts on the rear
of the MKB-2 display/keyboard module in the voice
command console and occupies one MXL network
address. The address is set using a DIP switch on the
unit itself. One ACM-1 is required in each system.
This equipment is approved for operation over the
temperature range of 0°C to 49°C.

Cut Sheet: ACM-1

Additional information

Weight 3 lbs
Dimensions 14 × 14 × 3 in