Vesda VHH-100


Hand-Held LCD Programmer Module

Availability: Estimated 4 Weeks

  • Factory New
Brand: Vesda Part #: 45899 Categories: , Manufacturer Part #: VHH-100Secondary Part #: 500-699843


The Programmer Module allows direct access to all VESDAnet devices on an VESDA smoke detection system. It allows configuration and status reporting of detectors, displays and interfaces and is required when installing, commissioning and maintaining an VESDA network. By incorporating a user friendly menu, navigation through the comprehensive features of VESDAnet is convenient and simple.

The programmer module is available as a hand-held device (with included DB15 serial cable) or can be mounted into an VESDA VLP or VESDA VLS detector, a remote mounting box or a 19 inch sub rack.

The two rows of large push buttons enable the user to log ON and navigate through the menu trees to the various command and parameter setting functions. The top row of keys are called “Soft Keys” and are assigned programming options appropriate to the screen being viewed.

Some of the parameters that can be accessed via the programmer include device status reporting, zone number and name allocation, flow normalization, alarm threshold setting (day, night, weekend), initiation of AutoLearn, wiring order, relay testing and event log review.

Up to 14 assigned Users or Administrators with an individual 4 digit Personal Identification Number (PIN), and one Distributor, can log onto a VESDAnet system under one of three levels of access which are password protected:

  • User (USR) is only able to view parameters, check status, alarms and reset the system.
  • Administrator (ADM) has access to most commands and programming parameters.
  • Distributor (DST) is the topmost level and has unlimited access to all commands and parameters in the system.
  • Lost PIN numbers can be overcome by obtaining a once only pass number from your VESDA dealer.

The programmer automatically logs OFF when not in use for more than 10 minutes. The user is prompted with a beeping sound at 1 minute and at 15 seconds before log OFF. Any key may be pressed to cancel the automatic log OFF process.


Weight 0.80 lbs

Honeywell International





Unit of Measurement

EA (Each)


, ,

Production Status


Programming Functions

  • System configuration
  • Detector zone configuration and set up
  • Detector zone control
  • System status
  • Smoke Threshold and Detector Sensitivity settings
  • Event Log interrogation
  • Commissioning and testing
  • Set date and time
  • Referencing
  • AutoLearn
  • Passwords and user Configuration
  • System fault diagnostic


  • User friendly menu system
  • Supports multiple languages
  • Single point access to entire VESDAnet system
  • Alarm and fault simulation
  • Shows wiring order
  • Locates communications failures
  • Password security
  • Hand held or remote mounting
  • Automatic Logoff when inactive
  • Backlit LCD screen

VESDA LCD Programmer


Vesda – Data Sheet