This product has been replaced by

Edwards EST SIGA-OSD Intelligent Optical Smoke Detector

The SIGA-OSD smoke detector brings advanced photoelectric technology to a practical design which extends life safety and property protection capabilities.

Manufacturer Part #: SIGA-OSD

Edwards EST SIGA-OSD Intelligent Optical Smoke Detector

$58.54

The SIGA-OSD smoke detector brings advanced photoelectric technology to a practical design which extends life safety and property protection capabilities.

Availability: In Stock
Condition: New
Brand: Edwards, EST
Status: Active
SKU: 26418
Manufacturer Part #: SIGA-OSD
Alternative: SIGA-OSD-FCN

Description

The Signature Optica Series SIGA-OSD smoke detector brings advanced optical (photoelectric) technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reliability over the long-haul, while environmental compensation helps reduce maintenance costs. Like all Signature Optica Series detectors, the SIGA-OSD is an intelligent device that gathers analog information from multiple optical sensors, converting this data into digital signals. Utilizing dual optical wavelengths combined with multiple detection angles, the SIGA-OSD differentiates particles that are not representative of actual smoke. Particle data is input into digital filters which feed a series of ratios removing signal patterns that are typical of nuisance sources, thus reducing unwanted alarms. To make an alarm decision, the detector’s on-board microprocessor measures and analyzes all optical sensor readings and compares this information to preprogrammed settings.

Documents

Description

The Signature Optica Series SIGA-OSD smoke detector brings advanced optical (photoelectric) technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reliability over the long-haul, while environmental compensation helps reduce maintenance costs.

Like all Signature Optica Series detectors, the SIGA-OSD is an intelligent device that gathers analog information from multiple optical sensors, converting this data into digital signals. Utilizing dual optical wavelengths combined with multiple detection angles, the SIGA-OSD differentiates particles that are not representative of actual smoke. Particle data is input into digital filters which feed a series of ratios removing signal patterns that are typical of nuisance sources, thus reducing unwanted alarms. To make an alarm decision, the detector’s on-board microprocessor measures and analyzes all optical sensor readings and compares this information to preprogrammed settings.

Additional information

Weight 0.2 lbs
Dimensions 2.30 × 4.30 × 4.30 in
Manufacturer

UTC Fire & Security

Brand

,

Condition

New

Unit of Measurement

EA (Each)

Production Status

Active

Type

Detector

Style

Plug-In

Construction

Polymer

Detectable Medium

Smoke

Detection Method

Photoelectric

Programming

Electronic

Protocol

Signature Loop Controller

Test Method

Testifire 1000, Testifire 2000

Series

Reviews

There are no reviews yet.

Be the first to review “Edwards EST SIGA-OSD Intelligent Optical Smoke Detector”

Intelligent Smoke Detector SIGA-OSD

Download

Edwards - Data Sheet

Intelligent Smoke Detector SIGA-OSD

Download

Edwards - Installation Sheet

Edwards OPTICA Signature Series

View

FireAlarm.com - Product Spotlight

Attributes

Weight 0.2 lbs
Dimensions 2.30 × 4.30 × 4.30 in
Manufacturer

UTC Fire & Security

Brand

,

Condition

New

Unit of Measurement

EA (Each)

Production Status

Active

Type

Detector

Style

Plug-In

Construction

Polymer

Detectable Medium

Smoke

Detection Method

Photoelectric

Programming

Electronic

Protocol

Signature Loop Controller

Test Method

Testifire 1000, Testifire 2000

Series

Product Features

  • Multi-criteria optical smoke sensing technology
  • Wide 0.5 to 4.36 %/ft. (1.6 to 13.6 %/m) smoke obscuration
  • Uses Existing Wiring
  • Integrated nuisance rejection reducing unwanted alarms from general cooking particulates
  • Listed to UL 268 7th edition
  • Automatic Device Mapping
  • Up To 250 Total Signature Addresses Per Loop
  • Two Levels of Environmental Compensation
  • Two Levels of Dirty Detector Warning
  • Twenty Pre-Alarm Settings
  • Five Sensitivity Settings
  • Non-Volatile Memory
  • Electronic Addressing
  • Automatic Day/Night Sensitivity Adjustment
  • Bicolor (Green/Red) Status LED
  • Standard, Relay, Fault Isolator, and Audible Mounting Bases
  • Sensor Markings Provide Easy Testing Identification

 

Note: Some features described here may not be supported by all control systems.

What's Included

Shipping Details

Lead times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. Product availability and pricing may change depending on market conditions. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

This item must be returned within 45 days of the date it was purchased, shipped, delivered, or made ready for pickup. Refunds and returns must be sent via email to [email protected]. Please outline the items being returned, the reason for the return, along with any pictures of additional information about the product. See the return policy for complete information.

Testimonials

Rick A.
Dallas, TXI
Read More
"Great service. I received help with exactly what I needed and I received it all in a timely manner."
Charles O.
New Brunswick, NJ
Read More
"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"
Jason G.
Los Angeles, CA
Read More
"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."
Julia S.
Tampa, FL
Read More
"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

Reviews

There are no reviews yet.

Be the first to review “Edwards EST SIGA-OSD Intelligent Optical Smoke Detector”

You may also like...

Standard Detector Mounting Base
Mfr. Part #: SIGA-SB
SKU: 4637

$7.99

Detector Mounting Plate
Mfr. Part #: SIGA-DMP
SKU: 7253

$122.97

Pricing & Availability Details

Lead times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. Product availability and pricing may change depending on market conditions. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Payment Details

You may remit payment via a US-Based Credit Card (CC Authorization Form), Wire Transfer (w/ $30 or $50 fee added to invoice), via PayPal (Or PayPal Pay Later), or by mailing us a check. You can also call in with your credit card information at any time: 888-497-0290. All orders are subject to processing time at our main shipment hub.  After placing your order, you will be sent your shipment tracking number after the mandatory processing has been completed.

Return & Cancellation Details

This item must be returned within 45 days of the date it was purchased, shipped, delivered, or made ready for pickup. Refunds and returns must be sent via email to [email protected]. Please outline the items being returned, the reason for the return, along with any pictures of additional information about the product. See the return policy for complete information.