Notifier PSE-10E

$831.01

10.0 A, 240 VAC remote charger power supply in a lockable, metal enclosure

Availability: In Stock

Condition: New

Brand: Notifier

Status: Discontinued

SKU: 51175

Manufacturer Part #: PSE-10E

Replacement: HPF-PS10E

Description

The PS Series is a remote power supply line from NOTIFIER and is a direct replacement for the FCPS-24S6/8 Series. The PSE-6(C)(E) is a 6 amp and the PSE-10(C)(E) is a 10 amp, remote power supply with battery charger that may be connected to any 12 or 24 volt fire alarm control panel (FACP) or used as a standalone power supply. The PS Series provides 24 VDC power for NACs (notification appliance circuits) configured as either Class B or Class A (requires the ZNAC-PS option card) with multiple sync protocol options. The PS Series also provides auxiliary power, constant or resettable, suited for detectors, annunciators, door holders, and other fire alarm system peripherals. The PS Series cabinet can hold two 7 AH or 18 AH batteries and can charge up to 33 AH batteries in a separate cabinet. The PSE-6E and PSE-10E are models rated for 240V operation.

Documents

Description

The PS Series is a remote power supply line from NOTIFIER and is a direct replacement for the FCPS-24S6/8 Series. The PSE-6(C)(E) is a 6 amp and the PSE-10(C)(E) is a 10 amp, remote power supply with battery charger that may be connected to any 12 or 24 volt fire alarm control panel (FACP) or used as a standalone power supply. The PS Series provides 24 VDC power for NACs (notification appliance circuits) configured as either Class B or Class A (requires the ZNAC-PS option card) with multiple sync protocol options. The PS Series also provides auxiliary power, constant or resettable, suited for detectors, annunciators, door holders, and other fire alarm system peripherals. The PS Series cabinet can hold two 7 AH or 18 AH batteries and can charge up to 33 AH batteries in a separate cabinet. The PSE-6E and PSE-10E are models rated for 240V operation.

Additional information

Weight	19.00 lbs
Dimensions	3.50 × 14.50 × 20.00 in
Color	Black
Manufacturer	Honeywell International
Unit of Measurement	EA (Each)
Series	Notifier PS Series: Remote Power Supplies
Condition	New
Brand	Notifier
Production Status	Discontinued
Listings & Approvals	CSFM, FM, NYC, UL

Reviews

There are no reviews yet.

Be the first to review “Notifier PSE-10E”

You must be logged in to post a review.

PSE-6/PSE-10 Series; 6/10 Amp, 24 Volt Power Supply Expanders

Notifier - Data Sheet

PS Series Remote Conventional Power Supply Expanders

Notifier - Product Announcement

Attributes

Weight	19.00 lbs
Dimensions	3.50 × 14.50 × 20.00 in
Color	Black
Manufacturer	Honeywell International
Unit of Measurement	EA (Each)
Series	Notifier PS Series: Remote Power Supplies
Condition	New
Brand	Notifier
Production Status	Discontinued
Listings & Approvals	CSFM, FM, NYC, UL

Product Features

Up to five (6 amp model) or seven (10 amp model) independently-configurable, power-limited output circuits for:
- Class B and/or Class A NACs
- Class B and/or Class A resettable or non-resettable 24V auxiliary power
- door holder power
Converts from Class B to Class A wiring without losing any outputs using the ZNAC-PS converter card (sold separately)
Optimal for powering four-wire smoke detectors, annunciators, and other system peripherals requiring regulated power
Configurable for ANSI® Temporal 3 or Temporal 4 coded output
UL-Listed NAC synchronization using System Sensor®, Wheelock®, Gentex®, or AMSECO® appliances
Synchronization can be triggered from FACP NAC/remote sync outputs, cascaded power supply, or a control module, single or multi, which may be housed within the power supply cabinet
Ability to cascade up to four power supplies
Two (6 amp model) or three (10 amp model) fully-isolated input/ control circuits which can be programmed to any output
Two Form C normally-closed trouble relays for AC Trouble and General Trouble, Ground Fault relay available on Canadian models only
6 or 10 amp full load output, respectively, with 3 A maximum/circuit
Individual NAC power and trouble LEDs for diagnostic efficiency
Trouble history modes for diagnostic support
Wide range end-of-line supervision value (normal: 2K-27K ohms)
Selectable earth fault detection (enable or disable)
AC trouble report delay timer
Completely configurable via onboard DIP switches, no extra software required
Self-contained in compact, locking cabinet constructed of heavy gauge steel with a corrosion resistant powder coat chip and scratch-resistant finish
Cabinet designed with ten double knockouts and a removable door for ease of installation and wiring
Includes integral battery charger capable of charging up to 33 AH batteries
Cabinet can house two 7 AH or 18 AH batteries
Battery charger may be disabled via DIP switch for applications requiring larger batteries and external battery charger
Removable terminal blocks accommodate up to 12 AWG (3.1mm2) wire
Works with any UL 864 FACP which utilizes an industry-standard reverse-polarity notification circuit
Optional devices include addressable control, monitor, and relay modules and power-supervision relay (EOLR-1)

What's Included

Shipping Details

Pricing & Lead Times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

Equipment must be returned within (30) days of the date it was shipped, or made ready for pickup. In order to initiate a return, you must contact our sales team via email at [email protected] to receive an RMA # if it meets all criteria. Products returned after (30) days from our shipment date will be refused. After RMA acceptance, any parts that are returned to FireAlarm.com are subject to a minimum 25% restocking fee. New parts must be returned with original packaging, in un-opened, and uninstalled condition. If not, these parts may be subject to increased restocking fees or refusal. Depending on the circumstances of your order, and if you are a long-time customer of FireAlarm.com, other arrangements can be made. See our complete return policy for more information at: https://firealarm.com/faq/

Testimonials

"Great service. I received help with exactly what I needed and I received it all in a timely manner."

"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"

"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."

"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

Reviews

There are no reviews yet.

Be the first to review “Notifier PSE-10E”

You must be logged in to post a review.

You may also like…