This product has been replaced by

Det-Tronics PIRECLA3D1E1 (011906-501)

PointWatch Eclipse PIRECL Infrared CO2 Gas Detector w/ Hydrophobic Weather Protection, ATEX/IECEx

Manufacturer Part #: PIRECLA3D1E1

Det-Tronics PIRECLA3D1E1 (011906-501)

PointWatch Eclipse PIRECL Infrared CO2 Gas Detector w/ Hydrophobic Weather Protection, ATEX/IECEx

Availability: Please Call for Availability

Condition: New

Brand: Det-Tronics

Status: Active

SKU: 133042

Manufacturer Part #: PIRECLA3D1E1

Secondary Part #: 011906-501

Description

The PointWatch Eclipse® Model PIRECL is a diffusion based, infrared combustible gas detector that provides continuous, fixed monitoring of flammable hydrocarbon gases from 0 to 100% Lower Flammable Limit (LFL). Standard device outputs include an electrically isolated 4-20 mA signal with HART communication protocol, and RS-485 serial communication. Serial communication protocols supported include MODBUS and ASCII. An optional relay output board with two programmable alarm relay outputs and one fault relay output is available. An optional FlexVu® Explosion-Proof Universal Display Unit Model UD10, UD20 or UD30 can be used for remote calibration. Ideally suited for protection of challenging on/offshore oil and gas facilities and other downstream hydrocarbon applications, the PointWatch Eclipse is globally certified for use in Class I, Divisions 1 and 2, and Zones 1 and 2 hazardous areas. In addition, the stainless steel construction, sapphire optics, and modular design all combine to deliver industrial grade hardness along with easy installation and the lowest cost of ownership available.

Documents

Description

The PointWatch Eclipse® Model PIRECL is a diffusion based, infrared combustible gas detector that provides continuous, fixed monitoring of flammable hydrocarbon gases from 0 to 100% Lower Flammable Limit (LFL). Standard device outputs include an electrically isolated 4-20 mA signal with HART communication protocol, and RS-485 serial communication. Serial communication protocols supported include MODBUS and ASCII. An optional relay output board with two programmable alarm relay outputs and one fault relay output is available. An optional FlexVu® Explosion-Proof Universal Display Unit Model UD10, UD20 or UD30 can be used for remote calibration. Ideally suited for protection of challenging on/offshore oil and gas facilities and other downstream hydrocarbon applications, the PointWatch Eclipse is globally certified for use in Class I, Divisions 1 and 2, and Zones 1 and 2 hazardous areas. In addition, the stainless steel construction, sapphire optics, and modular design all combine to deliver industrial grade hardness along with easy installation and the lowest cost of ownership available.

Additional information

Weight	11.5 lbs
Manufacturer	Carrier
Brand	Det-Tronics
Condition	New
Unit of Measurement	EA (Each)
Production Status	Active
Model	PIRECL

Infrared Hydrocarbon Gas Detector PointWatch Eclipse®; Model PIRECL

Det-Tronics - Data Sheet

2023 Det-Tronics Product Catalog

Det-Tronics – Product Catalog

Attributes

Weight	11.5 lbs
Manufacturer	Carrier
Brand	Det-Tronics
Condition	New
Unit of Measurement	EA (Each)
Production Status	Active
Model	PIRECL

Product Features

Superior optics protection system.
No undisclosed failure modes.
SIL 2 model certified to IEC 61508 by exida®
Routine calibration not required.
Explosion-proof, stainless steel housing with tethered weather protection baffle.
Integral wiring compartment eliminates need for external junction boxes.
Built-in tri-color LED eliminates need for external display module.
Built-in optional relay package eliminates need for external relay output module.
EQP models available.
Non-interfering HART communication capability.
Optional Intrinsically Safe HART communication port
Optional hand-held HART communicator enables field configuration and calibration.
Optional model UD10, UD20 or UD30 Universal Display for remote calibration.
Heated sapphire optics deliver long-lasting, high performance detection capability.
Immune to damage from exposure to constant background gases or to high gas concentrations.
FM, CSA, ATEX, IECEx, DNV/MED, and INMETRO certifications.
Certified to FM/CSA Class I, Div. 1 and ATEX/IECEx Ex db, eb protection standards for maximum versatility.
Gas performance verification by FM/CSA/ATEX.
Certified, factory set and calibrated to methane, propane, ethylene, or butane.
Faster response output option available.

What's Included

Shipping Details

Pricing & Lead Times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

Equipment must be returned within (30) days of the date it was shipped, or made ready for pickup. In order to initiate a return, you must contact our sales team via email at [email protected] to receive an RMA # if it meets all criteria. Products returned after (30) days from our shipment date will be refused. After RMA acceptance, any parts that are returned to FireAlarm.com are subject to a minimum 25% restocking fee. New parts must be returned with original packaging, in un-opened, and uninstalled condition. If not, these parts may be subject to increased restocking fees or refusal. Depending on the circumstances of your order, and if you are a long-time customer of FireAlarm.com, other arrangements can be made. See our complete return policy for more information at: https://firealarm.com/faq/

Testimonials

"Great service. I received help with exactly what I needed and I received it all in a timely manner."

"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"

"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."

"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

You may also like...