Awaiting product image

Fireye EP163

$1,857.73

Programmer, Selectable purge (30 sec min.), selectable TFI via ED510 display, non-recycle

Availability: Please Call for Availability

Condition: New

Brand: Fireye

Status: Active

SKU: 179665

Manufacturer Part #: EP163

Description

The Fireye EP160, EP161 (extended MTFI), EP163 (programmable), EP170, and EP174 (early spark termination), EP165, EP166 (pilot stabilization), or EP177 (early spark termination and programmable operating parameters) programmer modules are utilized with the FLAME-MONITOR Burner Management Control System (P/N’s E100 and E110). Several operational characteristics of the programmer are determined by six (6) dip switches located on the side of the programmer. These characteristics include forced blower motor start delay (dip switch 1), extended purge timing (dip switches 3, 4, 5), and the option requiring the 3-P running interlock circuit to be proven open at the start of the operating cycle (dip switch 6). Dip switch 2 is inactive. Models EP163 and EP177 characteristics are programmed via the ED510 Display Module, rather than by dip switch. The EP160, EP161, EP163, EP165, EP166, EP170, EP174, and EP177 programmers provide start-up programming, safe-start check, and flame monitoring supervision. They ensure open damper (high purge) pre-purge, proof of low fire position, and fuel valve end switch safety checks. A running interlock circuit on the FLAME-MONITOR system constantly monitors the limit switches, air flow switches, and fuel pressure switches through the programmer. The programmer control is designed to initiate a safety lockout if any of these circuits are open at the improper point in the control cycle.

Documents

Description

The Fireye EP160, EP161 (extended MTFI), EP163 (programmable), EP170, and EP174 (early spark termination), EP165, EP166 (pilot stabilization), or EP177 (early spark termination and programmable operating parameters) programmer modules are utilized with the FLAME-MONITOR Burner Management Control System (P/N’s E100 and E110). Several operational characteristics of the programmer are determined by six (6) dip switches located on the side of the programmer. These characteristics include forced blower motor start delay (dip switch 1), extended purge timing (dip switches 3, 4, 5), and the option requiring the 3-P running interlock circuit to be proven open at the start of the operating cycle (dip switch 6). Dip switch 2 is inactive. Models EP163 and EP177 characteristics are programmed via the ED510 Display Module, rather than by dip switch.

The EP160, EP161, EP163, EP165, EP166, EP170, EP174, and EP177 programmers provide start-up programming, safe-start check, and flame monitoring supervision. They ensure open damper (high purge) pre-purge, proof of low fire position, and fuel valve end switch safety checks. A running interlock circuit on the FLAME-MONITOR system constantly monitors the limit switches, air flow switches, and fuel pressure switches through the programmer. The programmer control is designed to initiate a safety lockout if any of these circuits are open at the improper point in the control cycle.

Additional information

Weight	0.6 lbs
Manufacturer	Fireye
Brand	Fireye
Condition	New
Unit of Measurement	EA (Each)
Production Status	Active

Reviews

There are no reviews yet.

Be the first to review “Fireye EP163”

You must be logged in to post a review.

Fireye EP160, EP161, EP163, EP165, EP166, EP170, EP174 and EP177 Programmer Modules

Fireye - Manual

Attributes

Weight	0.6 lbs
Manufacturer	Fireye
Brand	Fireye
Condition	New
Unit of Measurement	EA (Each)
Production Status	Active

Product Features

What's Included

Shipping Details

Pricing & Lead Times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

Equipment must be returned within (30) days of the date it was shipped, or made ready for pickup. In order to initiate a return, you must contact our sales team via email at [email protected] to receive an RMA # if it meets all criteria. Products returned after (30) days from our shipment date will be refused. After RMA acceptance, any parts that are returned to FireAlarm.com are subject to a minimum 25% restocking fee. New parts must be returned with original packaging, in un-opened, and uninstalled condition. If not, these parts may be subject to increased restocking fees or refusal. Depending on the circumstances of your order, and if you are a long-time customer of FireAlarm.com, other arrangements can be made. See our complete return policy for more information at: https://firealarm.com/faq/

Testimonials

"Great service. I received help with exactly what I needed and I received it all in a timely manner."

"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"

"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."

"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

Reviews

There are no reviews yet.

Be the first to review “Fireye EP163”

You must be logged in to post a review.