Mircom BPS-602

Power Extender NAC Input 120VAC Output

Availability: Please call for availability

Request a Quote

Condition: New

Brand: Mircom

Status: Active

SKU: 71844

Manufacturer Part #: BPS-602

Description

Mircom’s BPS-602 is an extremely cost effective 6.5-amp voltage regulated remote power supply/battery charger. It may be connected to any 12 or 24-volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC such as strobes and horns) expansion support to meet ADA requirements. It also provides auxiliary power to support system accessories. The unit delivers regulated and filtered 24 or 12-volt power to Class B or Class A NAC loop circuits. Additionally, a separate 1.0A auxiliary output with reset for four (4)-wire smoke detectors is available. The 6.5 amp rated supply current can be divided between the four (4) outputs for powering NAC devices. Each output is rated at 2.5-amp max., and can be independently programmed for Steady, Temporal Code 3 or Strobe Synchronization. All outputs may be programmed for Input to Output Follower Mode (output will follow input. i.e. March Time Input, March Time Output). An individual output of - amp is achieved by paralleling 2 outputs. The BPS-602 in non-alarm condition independent loop supervision for Class A and/or Class B FACP NAC circuits is provided. In the event of a loop trouble the FACP will be notified via the steered input (input 1 or input 2). In addition, there are common trouble output terminals (N.C., C, N.O.) which are used to indicate general loop/system trouble. A common trouble input is provided for optional NC (normally closed) devices to report trouble to the FACP. Two (2) FACP signaling outputs can be employed and directed to control supervision and power delivery to any combination of the four (4) outputs. The unit also features “Loop Output” trouble memory indication to help identify troublesome sporadic problems.

Documents

Description

Mircom’s BPS-602 is an extremely cost effective 6.5-amp voltage regulated remote power supply/battery charger. It may be connected to any 12 or 24-volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC such as strobes and horns) expansion support to meet ADA requirements. It also provides auxiliary power to support system accessories. The unit delivers regulated and filtered 24 or 12-volt power to Class B or Class A NAC loop circuits. Additionally, a separate 1.0A auxiliary output with reset for four (4)-wire smoke detectors is available. The 6.5 amp rated supply current can be divided between the four (4) outputs for powering NAC devices. Each output is rated at 2.5-amp max., and can be independently programmed for Steady, Temporal Code 3 or Strobe Synchronization. All outputs may be programmed for Input to Output Follower Mode (output will follow input. i.e. March Time Input, March Time Output). An individual output of – amp is achieved by paralleling 2 outputs. The BPS-602 in non-alarm condition independent loop supervision for Class A and/or Class B FACP NAC circuits is provided. In the event of a loop trouble the FACP will be notified via the steered input (input 1 or input 2). In addition, there are common trouble output terminals (N.C., C, N.O.) which are used to indicate general loop/system trouble. A common trouble input is provided for optional NC (normally closed) devices to report trouble to the FACP. Two (2) FACP signaling outputs can be employed and directed to control supervision and power delivery to any combination of the four (4) outputs. The unit also features “Loop Output” trouble memory indication to help identify troublesome sporadic problems.

Additional information

Weight	0.8 lbs
Brand	Mircom
Condition	New
Production Status	Active

Reviews

There are no reviews yet.

Be the first to review “Mircom BPS-602”

You must be logged in to post a review.

Attributes

Weight	0.8 lbs
Brand	Mircom
Condition	New
Production Status	Active

Product Features

Power input 115VAC 60 Hz, 1.45 amp.
Two (2) Class A or two (2) Class B FACP inputs
Field selectable 24VDC or 12VDC voltage regulated power limited outputs
24VDC or 12VDC rated @ 6.5 amp max total alarm current
2.5-amp max current per output
Separate 1 Amp auxiliary output with built-in and remote reset capability
Two (2) outputs may be paralleled for more power on an indicating circuit
Programmable supervised indicating circuit outputs: Up to Four (4) Class B or Two (2) Class A or One (1)
Class A and Two (2) Class B-Thermal and short circuit protection with auto reset
Built-in charger for sealed lead acid or gel type batteries
Automatic switchover to stand-by battery when AC Fails
Zero voltage drop when switching over to battery backup
PTC battery protection
AC fail supervision (form “C” contact, 1 amp / 28VDC). Factory set for 1 minute with optional 18-hour delay setting (field selectable)
Battery presence and low battery supervision (form “C” contact, 1 amp / 28VDC)
Input and output status LED indicators
2 wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate
Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit)
Horn/Strobe sync protocols include Mircom, Amseco, Gentex, System Sensor, Faraday and Wheelock
March Time
Compatible with 12 or 24VDC fi re panels.
Filtered and electronically regulated output
Output loop supervision steered to input 1 or input 2
Common trouble input and output
Ground fault detection
Unit includes power supply, red enclosure, cam lock, open frame transformer and battery leads

What's Included

Shipping Details

Pricing & Lead Times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

Equipment must be returned within (30) days of the date it was shipped, or made ready for pickup. In order to initiate a return, you must contact our sales team via email at [email protected] to receive an RMA # if it meets all criteria. Products returned after (30) days from our shipment date will be refused. After RMA acceptance, any parts that are returned to FireAlarm.com are subject to a minimum 25% restocking fee. New parts must be returned with original packaging, in un-opened, and uninstalled condition. If not, these parts may be subject to increased restocking fees or refusal. Depending on the circumstances of your order, and if you are a long-time customer of FireAlarm.com, other arrangements can be made. See our complete return policy for more information at: https://firealarm.com/faq/

Testimonials

"Great service. I received help with exactly what I needed and I received it all in a timely manner."

"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"

"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."

"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

Reviews

There are no reviews yet.

Be the first to review “Mircom BPS-602”

You must be logged in to post a review.