Altronix AL400ACMCB220

$319.25

Access Power Controller w/ Power Supply/Charger, 8 PTC Class 2 Relay Outputs, 12/24VDC @ 4A, FAI, 220VAC, BC400 Enclosure

Availability: Estimated 12 days

Condition: New

Brand: Altronix

Status: Active

SKU: 155039

Manufacturer Part #: AL400ACMCB220

Description

AL400ACMCB220 converts a nominal 220VAC 50/60Hz input into eight (8) independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 4A @ 12VDC or 3A @ 24VDC continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. This unit is designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Documents

Description

AL400ACMCB220 converts a nominal 220VAC 50/60Hz input into eight (8) independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 4A @ 12VDC or 3A @ 24VDC continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. This unit is designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Additional information

Weight	12 lbs
Dimensions	4.5 × 12.00 × 15.50 in
Manufacturer	Altronix Corp.
Brand	Altronix
Condition	New
Unit of Measurement	EA (Each)
Production Status	Active

Power Supply/Chargers with Multi-Output Access Power Controllers; ACMCB220 Series

Altronix - Data Sheet

Access Power Controllers with Power Supplies; ACMCB220 Series

Altronix - Installation Manual

Attributes

Weight	12 lbs
Dimensions	4.5 × 12.00 × 15.50 in
Manufacturer	Altronix Corp.
Brand	Altronix
Condition	New
Unit of Measurement	EA (Each)
Production Status	Active

Product Features

Eight (8) independently controlled Fail-Safe and/or Fail-Secure power outputs
Eight (8) auxiliary power outputs (unswitched)
Output PTCs are rated @ 2.5A
Filtered and electronically regulated outputs
Supervision: AC Fail, Battery Fail and Battery Presence
Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs
Alarm output relay indicates that FACP input is triggered
Fire Alarm disconnect input options: a) Normally open (NO) or normally closed (NC) dry contact input, b) Polarity reversal input from FACP signaling circuit
Built-in charger for sealed lead acid or gel type batteries
Instantaneous transfer to stand-by batteries
CE European Conformity
Lifetime Warranty

What's Included

Shipping Details

Pricing & Lead Times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

Equipment must be returned within (30) days of the date it was shipped, or made ready for pickup. In order to initiate a return, you must contact our sales team via email at [email protected] to receive an RMA # if it meets all criteria. Products returned after (30) days from our shipment date will be refused. After RMA acceptance, any parts that are returned to FireAlarm.com are subject to a minimum 25% restocking fee. New parts must be returned with original packaging, in un-opened, and uninstalled condition. If not, these parts may be subject to increased restocking fees or refusal. Depending on the circumstances of your order, and if you are a long-time customer of FireAlarm.com, other arrangements can be made. See our complete return policy for more information at: https://firealarm.com/faq/

Testimonials

"Great service. I received help with exactly what I needed and I received it all in a timely manner."

"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"

"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."

"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review