Altronix ACMS12 is a sub-assembly module designed to be used in Altronix wall and rack mount enclosures. Dual input design allows power to be steered from two (2) independent low voltage 5 to 24 VDC power sources into twelve (12) independently controlled fuse protected outputs. Outputs are activated by an open collector sink, normally open (NO), normally closed (NC) dry trigger input, or wet output from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACMS12 will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in Fail-Safe or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the twelve (12) outputs. The spade connectors allow you to daisy chain power to multiple ACMS12 modules. This feature allows you to distribute the power over more outputs for larger systems.
Altronix PDS16 dual input power distribution module is designed to steer the power from either two (2) low voltage AC or DC power sources. The two Inputs can be either, both DC (e.g. 12VDC and 24VDC) or both AC (e.g. 16VAC and 24VAC). That power is distributed over a total of sixteen (16) fuse protected outputs. The spade connectors allow you to daisy chain multiple PDS16 modules. This feature allows you to distribute the power over more outputs for larger systems.
| Weight | 1.45 lbs |
|---|---|
| Dimensions | 5.375 × 1.00 × 4.25 in |
| Manufacturer | Altronix Corp. |
| Brand | |
| Condition | New |
| Unit of Measurement | EA (Each) |
| Production Status | Active |
| Weight | 1.45 lbs |
|---|---|
| Dimensions | 5.375 × 1.00 × 4.25 in |
| Manufacturer | Altronix Corp. |
| Brand | |
| Condition | New |
| Unit of Measurement | EA (Each) |
| Production Status | Active |
