Det-Tronics UD10A5M25SR2C (010254-911)

FlexVu UD10 Universal Display, CGS, SIL/Russia

Condition: New
Brand: Det-Tronics
Status: Active
SKU: 133187
Manufacturer Part #: UD10A5M25SR2C
Secondary Part #: 010254-911


The FlexVu® Model UD10 is recommended for applications that require a gas detector with digital readout of detected gas levels as well as analog 4–20 mA output with HART, relay contacts, and Modbus RS485. The UD10 is designed for use with Det-Tronics gas detectors such as GT3000, PIR9400, PIRECL, PIRECL CO2, OPECL, C706x*, Model 505/CGS, CGS**, NTMOS, ATX100/ AV10, PIRDUCT, or LS2000, as well as generic linear 4–20 mA sensors. The display unit is designed and approved as a “stand alone” device and performs all the functions of a gas controller. Gas concentration and unit of measurement are indicated on a digital display. The display unit provides a linear isolated/non-isolated 4–20 mA DC output signal (with HART) that corresponds to the detected gas concentration. All electronics are enclosed in an explosion-proof aluminum or stainless steel housing. The display unit is used with a single detector that may be either coupled directly to the UD10, or remotely located using a sensor termination box. The UD10 features non-intrusive calibration. A magnet is used to perform calibration as well as to navigate the UD10’s internal menu.

Additional information

Weight 4.2 lbs





Unit of Measurement

EA (Each)

Production Status




  • Compliance to ISA-92.0.01 Part 1 performance standard, and EN50104 for oxygen depletion
  • Performance certified to FM 6310/6320, CSA 22.2 #152, ATEX EN60079-29-1, ANSI/ISA 60079-29-1, and IEC60079-29-1
  • Division Approval Ratings: FM and CSA
  • Zone Approval Ratings: FM, CSA, ATEX, and IECEx
  • Accepts 4-20 mA input from a variety of detection devices (gas, flame, pressure, flow, etc.)
  • Compatible with FlexSonic Acoustic leak detector AC100/ATX10, providing spectrum display and configuration setup menus
  • Non-intrusive menu allows device calibration without de-classifying the hazardous area
  • Continuously displays gas level, gas type, and units measured
  • Alarm setpoints adjustable via network
  • Data logger for event time and date stamping
  • Heated and backlit display
  • IP66 rated
  • Emulates the EQ22xxDCU for direct replacement
  • Replaces EQ2200 DCUEX for direct replacement

FlexVu® Explosion-Proof Universal Display Unit; Model UD10


Det-Tronics - Data Sheet

2023 Det-Tronics Product Catalog


Det-Tronics - Product Catalog