Det-Tronics UD10A5M25T2C (010254-021)

FlexVu UD10 Universal Display, CGS, SIL /FM/CSA/ATEX/IECEx, Aluminum, M25 Thread

Availability: Please call for availability
Condition: New
Brand: Det-Tronics
Status: Active
SKU: 133188
Manufacturer Part #: UD10A5M25T2C
Secondary Part #: 010254-021

Description

The FlexVu® Model UD10 is recommended for applications that require a gas detector with digital readout of detected gas levels as well as analog 4–20 mA output with HART, relay contacts, and Modbus RS485. The UD10 is designed for use with Det-Tronics gas detectors such as GT3000, PIR9400, PIRECL, PIRECL CO2, OPECL, C706x*, Model 505/CGS, CGS**, NTMOS, ATX100/ AV10, PIRDUCT, or LS2000, as well as generic linear 4–20 mA sensors. The display unit is designed and approved as a “stand alone” device and performs all the functions of a gas controller. Gas concentration and unit of measurement are indicated on a digital display. The display unit provides a linear isolated/non-isolated 4–20 mA DC output signal (with HART) that corresponds to the detected gas concentration. All electronics are enclosed in an explosion-proof aluminum or stainless steel housing. The display unit is used with a single detector that may be either coupled directly to the UD10, or remotely located using a sensor termination box. The UD10 features non-intrusive calibration. A magnet is used to perform calibration as well as to navigate the UD10’s internal menu.

Documents

Description

The FlexVu® Model UD10 is recommended for applications that require a gas detector with digital readout of detected gas levels as well as analog 4–20 mA output with HART, relay contacts, and Modbus RS485. The UD10 is designed for use with Det-Tronics gas detectors such as GT3000, PIR9400, PIRECL, PIRECL CO2, OPECL, C706x*, Model 505/CGS, CGS**, NTMOS, ATX100/ AV10, PIRDUCT, or LS2000, as well as generic linear 4–20 mA sensors. The display unit is designed and approved as a “stand alone” device and performs all the functions of a gas controller. Gas concentration and unit of measurement are indicated on a digital display. The display unit provides a linear isolated/non-isolated 4–20 mA DC output signal (with HART) that corresponds to the detected gas concentration. All electronics are enclosed in an explosion-proof aluminum or stainless steel housing. The display unit is used with a single detector that may be either coupled directly to the UD10, or remotely located using a sensor termination box. The UD10 features non-intrusive calibration. A magnet is used to perform calibration as well as to navigate the UD10’s internal menu.

Additional information

Weight 4.2 lbs
Manufacturer

Carrier

Brand

Det-Tronics

Condition

New

Unit of Measurement

EA (Each)

Production Status

Active

Model

UD10

FlexVu® Explosion-Proof Universal Display Unit; Model UD10

Download

Det-Tronics - Data Sheet

2023 Det-Tronics Product Catalog

Download

Det-Tronics - Product Catalog

Attributes

Weight 4.2 lbs
Manufacturer

Carrier

Brand

Det-Tronics

Condition

New

Unit of Measurement

EA (Each)

Production Status

Active

Model

UD10

Product Features

  • Compliance to ISA-92.0.01 Part 1 performance standard, and EN50104 for oxygen depletion
  • Performance certified to FM 6310/6320, CSA 22.2 #152, ATEX EN60079-29-1, ANSI/ISA 60079-29-1, and IEC60079-29-1
  • Division Approval Ratings: FM and CSA
  • Zone Approval Ratings: FM, CSA, ATEX, and IECEx
  • Accepts 4-20 mA input from a variety of detection devices (gas, flame, pressure, flow, etc.)
  • Compatible with FlexSonic Acoustic leak detector AC100/ATX10, providing spectrum display and configuration setup menus
  • Non-intrusive menu allows device calibration without de-classifying the hazardous area
  • Continuously displays gas level, gas type, and units measured
  • Alarm setpoints adjustable via network
  • Data logger for event time and date stamping
  • Heated and backlit display
  • IP66 rated
  • Emulates the EQ22xxDCU for direct replacement
  • Replaces EQ2200 DCUEX for direct replacement

What's Included

Shipping Details

You may remit payment via a US-Based Credit Card (CC Authorization Form), Wire Transfer (w/ $30 or $50 fee added to invoice), via PayPal (Or PayPal Pay Later), or by mailing us a check. You can also call in with your credit card information at any time: 888-497-0290. All orders are subject to processing time at our main shipment hub.  After placing your order, you will be sent your shipment tracking number after the mandatory processing has been completed.

Return Details

This item must be returned within 45 days of the date it was purchased, shipped, delivered, or made ready for pickup. Refunds and returns must be sent via email to [email protected]. Please outline the items being returned, the reason for the return, along with any pictures of additional information about the product. See the return policy for complete information.

Testimonials

Rick A.
Dallas, TXI
Read More
"Great service. I received help with exactly what I needed and I received it all in a timely manner."
Charles O.
New Brunswick, NJ
Read More
"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"
Jason G.
Los Angeles, CA
Read More
"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."
Julia S.
Tampa, FL
Read More
"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

Shipping Details

You may remit payment via a US-Based Credit Card (CC Authorization Form), Wire Transfer (w/ $30 or $50 fee added to invoice), via PayPal (Or PayPal Pay Later), or by mailing us a check. You can also call in with your credit card information at any time: 888-497-0290. All orders are subject to processing time at our main shipment hub.  After placing your order, you will be sent your shipment tracking number after the mandatory processing has been completed.

Return Details

This item must be returned within 45 days of the date it was purchased, shipped, delivered, or made ready for pickup. Refunds and returns must be sent via email to [email protected]. Please outline the items being returned, the reason for the return, along with any pictures of additional information about the product. See the return policy for complete information.

Pricing & Availability Details

Lead times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. Product availability and pricing may change depending on market conditions. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.