This product has been replaced by

Edwards EST SIGA-PD

Intelligent Optical Smoke Detector

Manufacturer Part #: SIGA-PD

Edwards EST SIGA-PD

$127.50

Intelligent Optical Smoke Detector

Availability: In Stock

Condition: New

Brand: Edwards, EST

Status: Discontinued

SKU: 15862

Manufacturer Part #: SIGA-PD

Replacement: SIGA-OSD

Description

The Signature Series SIGA-PD optical smoke detector brings advanced sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reliability over the long-haul, while environmental compensation helps reduce maintenance costs.

Like all Signature Series detectors, the SIGA-PD is an intelligent device that gathers analog information from its optical sensor, converting this data into digital signals. To make an alarm decision, the detector’s on-board microprocessor measures and analyzes sensor readings and compares this information to historical data. Digital filters remove signal patterns that are not typical of fires, thus virtually eliminating unwanted alarms.

Documents

Description

The Signature Series SIGA-PD optical smoke detector brings advanced sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reliability over the long-haul, while environmental compensation helps reduce maintenance costs.

Like all Signature Series detectors, the SIGA-PD is an intelligent device that gathers analog information from its optical sensor, converting this data into digital signals. To make an alarm decision, the detector’s on-board microprocessor measures and analyzes sensor readings and compares this information to historical data. Digital filters remove signal patterns that are not typical of fires, thus virtually eliminating unwanted alarms.

Additional information

Weight	0.4 lbs
Dimensions	2.00 × 4.30 × 4.30 in
Manufacturer	UTC Fire & Security
Brand	Edwards, EST
Condition	New
Type	Detector
Style	Plug-In
Construction	Polymer
Detectable Medium	Smoke
Detection Method	Photoelectric
Programming	Electronic
Series	Signature Series
Production Status	Discontinued

Reviews

There are no reviews yet.

Be the first to review “Edwards EST SIGA-PD”

You must be logged in to post a review.

SIGA-PD Intelligent Photoelectric Smoke Detector

Edwards - Data Sheet

SIGA-PD Intelligent Photoelectric Smoke Detector

Edwards - Installation Sheet

Edwards Product Bulletin - 1st Generation Signature Detectors Obsoletion

Edwards - Important Announcement

Attributes

Weight	0.4 lbs
Dimensions	2.00 × 4.30 × 4.30 in
Manufacturer	UTC Fire & Security
Brand	Edwards, EST
Condition	New
Type	Detector
Style	Plug-In
Construction	Polymer
Detectable Medium	Smoke
Detection Method	Photoelectric
Programming	Electronic
Series	Signature Series
Production Status	Discontinued

Product Features

Next Generation Optical Smoke Sensing Technology
Wide 0.53 to 3.94 %/ft. (1.7 to 12.35 %/m) smoke obscuration
Uses Existing Wiring
Automatic Device Mapping
Up To 250 Total Signature Addresses Per Loop
Two Levels of Environmental Compensation
Two Levels of Dirty Detector Warning
Twenty Pre-Alarm Settings
Five Sensitivity Settings
Non-Volatile Memory
Electronic Addressing
Identification of Dirty or Defective Detectors
Automatic Day/Night Sensitivity Adjustment
Bicolor (Green/Red) Status Led
Standard, Relay, Fault Isolator, and Audible Mounting Bases
Sensor Markings Provide Easy Testing Identification

Note: Some features described here may not be supported by all control systems. Check your control panel’s Installation and Operation Guide for details.

What's Included

Shipping Details

Pricing & Lead Times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

Equipment must be returned within (30) days of the date it was shipped, or made ready for pickup. In order to initiate a return, you must contact our sales team via email at [email protected] to receive an RMA # if it meets all criteria. Products returned after (30) days from our shipment date will be refused. After RMA acceptance, any parts that are returned to FireAlarm.com are subject to a minimum 25% restocking fee. New parts must be returned with original packaging, in un-opened, and uninstalled condition. If not, these parts may be subject to increased restocking fees or refusal. Depending on the circumstances of your order, and if you are a long-time customer of FireAlarm.com, other arrangements can be made. See our complete return policy for more information at: https://firealarm.com/faq/

Testimonials

"Great service. I received help with exactly what I needed and I received it all in a timely manner."

"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"

"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."

"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

Reviews

There are no reviews yet.

Be the first to review “Edwards EST SIGA-PD”

You must be logged in to post a review.

You may also like…

Edwards EST SIGA-SB
$7.99
Add to cart

You may also like...

Edwards EST SIGA-SB

Standard Detector Mounting Base

Mfr. Part #: SIGA-SB

SKU: 4637

$7.99