This product has been replaced by

FGD FLS-FSIM-IR3-KIT

IR3 flame simulator (FIK‐IR3 and FIK‐IR3‐HD)

Manufacturer Part #: FLS-FSIM-IR3-KIT

FGD FLS-FSIM-IR3-KIT

$4,770.38

IR3 flame simulator (FIK‐IR3 and FIK‐IR3‐HD)

Availability: Estimated 14 days

Condition: New

Brand: FGD

Status: Active

SKU: 126251

Manufacturer Part #: FLS-FSIM-IR3-KIT

Description

Flame simulators are often used by industry to perform detector testing during commissioning and periodic system testing. The FlameSpec simulators are inexpensive, lightweight and simple to use. The modern ergonomic design, with alignment markers, allows accurate, fast and convenient detector performance verification. Suitable for use in hazardous areas, the FlameSpec simulators can be used at distances of up to 23.0 feet (7.0 meters) from the detector.

Three different models are available for testing each type of flame detector (IR3, IR3‐H2 and UV‐IR).

All Fike flame detectors perform automatic self‐tests of their optics, windows, electronics and software. Additionally, the Fike flame detectors can be manually put into alarm via the detector’s communicator software or by short circuiting the “Manual BIT” terminal and the “24 VDC (‐) terminal for one second. The FlameSpec flame test simulators are designed to complement these inbuilt features by providing a fully external loop test capability.

Documents

Description

Flame simulators are often used by industry to perform detector testing during commissioning and periodic system testing. The FlameSpec simulators are inexpensive, lightweight and simple to use. The modern ergonomic design, with alignment markers, allows accurate, fast and convenient detector performance verification. Suitable for use in hazardous areas, the FlameSpec simulators can be used at distances of up to 23.0 feet (7.0 meters) from the detector.

Three different models are available for testing each type of flame detector (IR3, IR3‐H2 and UV‐IR).

All Fike flame detectors perform automatic self‐tests of their optics, windows, electronics and software. Additionally, the Fike flame detectors can be manually put into alarm via the detector’s communicator software or by short circuiting the “Manual BIT” terminal and the “24 VDC (‐) terminal for one second. The FlameSpec flame test simulators are designed to complement these inbuilt features by providing a fully external loop test capability.

Additional information

Weight	4 lbs
Dimensions	3.90 × 3.90 × 7.80 in
Manufacturer	Fire & Gas Detection Technologies, Inc.
Brand	FGD
Condition	New
Unit of Measurement	EA (Each)
Production Status	Active

FlameSpec Flame Simulators

Fike - Data Sheet

FlameSpec Flame Simulators

FGD - User Manual

Attributes

Weight	4 lbs
Dimensions	3.90 × 3.90 × 7.80 in
Manufacturer	Fire & Gas Detection Technologies, Inc.
Brand	FGD
Condition	New
Unit of Measurement	EA (Each)
Production Status	Active

Product Features

Complementary to Fike’s Flame Detector inbuilt test features. – Enables full end‐ to‐end system test.
Inexpensive, lighweight and simple to use. – Reduced initial cost and ongoing maintenance costs.
Activation of test from up to 23 feet (7 meters). – Reduces the need for scaffolding.
Hazardous area use approved. ‐ No time‐ consuming hot work permit required.
More than 1,000 activations between charges. – Ready to use when you are.
Includes carrying strap, protective storage case, battery charger and operating instructions. – Easy to transport and supplied with everything you need.

What's Included

Shipping Details

Pricing & Lead Times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

Equipment must be returned within (30) days of the date it was shipped, or made ready for pickup. In order to initiate a return, you must contact our sales team via email at [email protected] to receive an RMA # if it meets all criteria. Products returned after (30) days from our shipment date will be refused. After RMA acceptance, any parts that are returned to FireAlarm.com are subject to a minimum 25% restocking fee. New parts must be returned with original packaging, in un-opened, and uninstalled condition. If not, these parts may be subject to increased restocking fees or refusal. Depending on the circumstances of your order, and if you are a long-time customer of FireAlarm.com, other arrangements can be made. See our complete return policy for more information at: https://firealarm.com/faq/

Testimonials

"Great service. I received help with exactly what I needed and I received it all in a timely manner."

"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"

"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."

"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

You may also like...