Fire-Lite FCPS-24FS8C

8.0 A, 120 VAC remote charger power supply, ULC-Listed

Condition: New
Brand: Fire-Lite
Status: Obsolete
SKU: 30382
Manufacturer Part #: FCPS-24FS8C
Replacement: FL-PS10

Description

The Fire•Lite FCPS-24FS8(C/E) is a compact, cost-effective, 8-amp remote power supplies with battery charger. The FCPS-24FS8C/E) may be connected to any 12 or 24 volt fire alarm control panel (FACP) or may stand-alone. Primary applications include notification appliance (bell) circuit (NAC) expansion (to support ADA requirements and NAC synchronization) or auxiliary power to support 24 volt system accessories. The FCPS provides regulated and filtered 24 VDC power to four notification appliance circuits configured as either two Class B (Style Y) and Class A (Style Z, with ZNAC-4 option module) or four class B only. Alternately, the four outputs may be configured as any combination of resettable/non-resettable power outputs (optimal for powering four-wire smoke detectors. The FCPS-24FS8(C/E) also contains a battery charger capable of charging up to 18.0 Amp hour batteries. The FCPS-24FS8C is ULC-listed.

Additional information

Weight 15 lbs
Dimensions 2.75 × 14.50 × 15.00 in
Color

Red

Condition

New

Unit of Measurement

EA (Each)

Manufacturer

Honeywell

Series

Production Status

Obsolete

Brand

Listings & Approvals

CSFM, FM, MEA, UL, ULC

Features

  • UL-Listed Notification Appliance Circuit (NAC) synchronization using System Sensor®, Wheelock®, or Gentex® “Commander2” appliances
  • Operates as a “sync-follower” or as a “sync-generator” (default)

    See note on page 2.

  • Contains two fully-isolated input/control circuits – triggered from FACP NAC (NAC expander mode) or jumped permanently “ON” (stand-alone mode)
  • Two Class B (Style Y) or Class A (Style Z, with ZNAC-4 module) NACs (circuits 1 & 3)
  • 8-amp full load output, with 3 amps maximum/circuit, in NAC expander mode (UL 864)
  • 6-amp continuous output in stand-alone mode (UL 1481)
  • Compatible with coded inputs; signals passed through
  • Optional power-supervision relay (EOLR-1)
  • In stand-alone mode, output power circuits may be configured as: resettable, (reset line from FACP required), non-resettable, or a mix of two and two
  • Fully regulated and filtered power output – optimal for powering four-wire smoke detectors, annunciators, and other system peripherals requiring regulated/filtered power
  • Power-limiting technology meets UL power-limiting requirements.
  • Form-C normally-closed trouble relay
  • Fully supervised power supply, battery, and NACs
  • Selectable earth fault detection
  • AC trouble report selectable for immediate 2-hour delay
  • Works with virtually any UL 864 fire alarm control which utilizes an industry-standard reverse-polarity notification circuit (including unfiltered and unregulated bell power)
  • Requires input trigger voltage of 9 – 32 VDC
  • Self-contained in compact, locking cabinet – 15”H x 14.5”W x 2.75”D (cm: 38.1H x 36.83W x 6.985D)
  • Includes integral battery charger capable of charging up to 18 AH batteries. Cabinet capable of housing 7.0 AH batteries
  • Battery charger may be disabled via DIP switch for applications requiring larger batteries
  • Fixed, clamp-type terminal blocks accommodate up to 12 AWG (3.1mm2) wire

Reviews

There are no reviews yet.

Be the first to review “Fire-Lite FCPS-24FS8C”

FCPS-24FS8(C/E); 8 Amp, 24 Volt Remote Power Supply

Download

Fire-Lite Alarms - Data Sheet

Field Charger/Power Supply; FCPS-24FS6 & FCPS-24FS8, FCPS-24FS6E & FCPS-24FS8E, FCPS-24FS6C & FCPS-24FS8C

Download

Fire-Lite Alarms - Installation Manual

New FL-PS Series Remote Power Supplies

Download

Fire-Lite Alarms - Product Catalog