Fire-Lite MS-9200UDLS

Intelligent Addressable FACP with Built-In Communicator

Availability: Please Call for Availability

Request a Quote

Condition: New

Brand: Fire-Lite

Status: Discontinued

SKU: 47313

Manufacturer Part #: MS-9200UDLS

Replacement: ES-50X, EX-200X

Description

The Fire•Lite MS-9200UDLS Rev 3 with Version 5.0 firmware is a combination FACP (Fire Alarm Control Panel) and DACT (Digital Alarm Communicator/Transmitter) all on one circuit board. This compact intelligent addressable control panel has an extensive list of powerful features. While the MS-9200UDLS Rev 3 may be used with an SLC configured in the CLIP (Classic Loop Interface Protocol) mode, it can also operate in LiteSpeed mode—Fire•Lite’s latest polling technology—for a quicker device response time. LiteSpeed’s patented technology polls 10 devices at a time. This improvement allows a fully-loaded panel with up to 198 devices to report an incident and activate the notification circuits in under 10 seconds. With Litespeed polling, devices can be wired on standard twisted, unshielded wire up to a distance of 10,000 feet. The MS-9200UDLS Rev 3’s quick-remove chassis protects the electronics during construction. The backbox can be installed allowing field wiring to be pulled. When construction is completed, the electronics can be quickly installed with just two bolts.

Documents

Description

The Fire•Lite MS-9200UDLS Rev 3 with Version 5.0 firmware is a combination FACP (Fire Alarm Control Panel) and DACT (Digital Alarm Communicator/Transmitter) all on one circuit board. This compact intelligent addressable control panel has an extensive list of powerful features.

While the MS-9200UDLS Rev 3 may be used with an SLC configured in the CLIP (Classic Loop Interface Protocol) mode, it can also operate in LiteSpeed mode—Fire•Lite’s latest polling technology—for a quicker device response time. LiteSpeed’s patented technology polls 10 devices at a time. This improvement allows a fully-loaded panel with up to 198 devices to report an incident and activate the notification circuits in under 10 seconds. With Litespeed polling, devices can be wired on standard twisted, unshielded wire up to a distance of 10,000 feet.

The MS-9200UDLS Rev 3’s quick-remove chassis protects the electronics during construction. The backbox can be installed allowing field wiring to be pulled. When construction is completed, the electronics can be quickly installed with just two bolts.

Additional information

Weight	16.00 lbs
Dimensions	8.50 × 22.50 × 20.00 in
Manufacturer	Honeywell
Unit of Measurement	EA (Each)
Brand	Fire-Lite
Condition	New
Type	Control Panel
Style	Addressable
Color	Red
Series	N/A
Production Status	Discontinued
Compatibility	N/A

Reviews

There are no reviews yet.

Be the first to review “Fire-Lite MS-9200UDLS”

You must be logged in to post a review.

MS-9200UDLS(E): Intelligent Addressable FACP with Built-In Communicator

Fire-Lite - Data Sheet

Addressable Fire Alarm Control Panel: MS-9200UDLS, MS-9200UDLSE, MS-9200UDLSC

Fire-Lite - Data Sheet

Attributes

Weight	16.00 lbs
Dimensions	8.50 × 22.50 × 20.00 in
Manufacturer	Honeywell
Unit of Measurement	EA (Each)
Brand	Fire-Lite
Condition	New
Type	Control Panel
Style	Addressable
Color	Red
Series	N/A
Production Status	Discontinued
Compatibility	N/A

Product Features

Listed to UL standard 864, 9th edition.
On-board DACT.
Remote site or local USB port upload/download, using PS-Tools.
Four (4) Style Y (Class B) NAC circuits, which can be converted to four (4) Style Z (Class A) circuits with optional ZNAC-92 converter module. (Up to 6.0 amps total NAC power when using optional XRM-24B.)
Selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices.
Remote Acknowledge, Silence, Reset and Drill via addressable monitor modules or LCD-80F, ANN-80 or Legacy ACS Annunciators.
ANN-BUS for connection to following optional modules (cannot be used if ACS annunciators are used):
- ANN-80(-W) Remote LCD Annunciator
- ANN-I/O LED Driver
- ANN-S/PG Printer Module
- ANN-RLY Relay Module
- ANN-LED Annunciator Module
- ANN-RLED Annunciator Module alarms only
- ROME Relay Option Module Enclosure
ACS/TERM:
- ACS Annunciators: Up to 32 Legacy ACM Series annunciators (ACM-16AT or ACM-32 series). Cannot be used if ANN-BUS devices are used.
- Terminal-mode Annunciators: Up to 32 Legacy LCD-80F remote annunciators.
EIA-232 printer/PC interface (variable baud rate) on main circuit board, for use with optional UL-listed printer PRN-6F.
Integral 80-character LCD display with backlighting.
Real-time clock/calendar with automatic daylight savings control.
Detector sensitivity test capability (NFPA 72 compliant).
History file with 1,000-event capacity.
Maintenance alert warns when smoke detector dust accumulation is excessive.
Automatic device type-code verification.
One person audible or silent walk test with walk-test log and printout.
Point trouble identification.
Waterflow (nonsilenceable) selection per monitor point.
System alarm verification selection per detector point.
PAS (Positive Alarm Sequence) and presignal delay per point (NFPA 72 compliant).

What's Included

Shipping Details

Pricing & Lead Times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

Equipment must be returned within (30) days of the date it was shipped, or made ready for pickup. In order to initiate a return, you must contact our sales team via email at [email protected] to receive an RMA # if it meets all criteria. Products returned after (30) days from our shipment date will be refused. After RMA acceptance, any parts that are returned to FireAlarm.com are subject to a minimum 25% restocking fee. New parts must be returned with original packaging, in un-opened, and uninstalled condition. If not, these parts may be subject to increased restocking fees or refusal. Depending on the circumstances of your order, and if you are a long-time customer of FireAlarm.com, other arrangements can be made. See our complete return policy for more information at: https://firealarm.com/faq/

Testimonials

"Great service. I received help with exactly what I needed and I received it all in a timely manner."

"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"

"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."

"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

Reviews

There are no reviews yet.

Be the first to review “Fire-Lite MS-9200UDLS”

You must be logged in to post a review.