The Point Identification Device connects to the Signaling Line Circuit (SLC) via two wires. The PID-95 will monitor, via a two-wire supervised SLC circuit, contact-type devices such as a water flow switch or a manual station. Upon activation of the monitored device, the PID-95 will report its address to the 600 Series or ILI95-E3 Series FACP via the analog SLC. The fire alarm control panel will then activate into all alarm programmed outputs related to the PID-95.
The Point Identification Device connects to the Signaling Line Circuit (SLC) via two wires. The PID-95 will monitor, via a two-wire supervised SLC circuit, contact-type devices such as a water flow switch or a manual station. Upon activation of the monitored device, the PID-95 will report its address to the 600 Series or ILI95-E3 Series FACP via the analog SLC. The fire alarm control panel will then activate into all alarm programmed outputs related to the PID-95.
| Weight | 0.2 lbs |
|---|---|
| Dimensions | 4.00 × 6.00 × 2.00 in |
| Manufacturer | Honeywell |
| Brand | |
| Condition | New |
| Unit of Measurement | EA (Each) |
| Production Status | Active |
| Weight | 0.2 lbs |
|---|---|
| Dimensions | 4.00 × 6.00 × 2.00 in |
| Manufacturer | Honeywell |
| Brand | |
| Condition | New |
| Unit of Measurement | EA (Each) |
| Production Status | Active |
