Mircom UDACT-300A

$299.52

Universal Digital Alarm Communicator Transmitter

Availability: Please Call for Availability

Condition: New

Brand: Mircom

Status: Active

SKU: 9010

Manufacturer Part #: UDACT-300A

Description

The UDACT-300A Digital Alarm Communicator Transmitter/ Dialer Module allows Mircom’s FA-1000, FX-2000 or FleX-Net Series Fire Alarm Control Panels to transmit Alarm, Supervisory and Trouble information on two telephone lines to a monitoring facility. The UDACT-300A is powered by the host fire alarm control panel and communicates with the fire alarm control panel via an RS-485 data link. The Digital Communicator can be programmed for dual line operation and uses the Security Industry Association (SIA) and Ademco Contact ID reporting protocols. The UDACT-300A can be configured locally via the on-board keypad and the CFG-300 Configuration Tool or with a UIMA programming tool and a computer with an available serial or USB port. In addition the UDACT-300A can be remotely configured using a personal computer with a modem. The UDACT-300A can be configured for either DACT or UDACT operation. In DACT mode the Digital Communicator reports common alarm, trouble and supervisory information. In UDACT mode the Digital Communicator reports point specific information. In addition the UDACT-300A is equipped with the ZDACT feature that allows for input circuits on the FX-2000 or FleX-Net panel to be grouped into software zones for the purpose of reporting to a central monitoring station.

Documents

Description

The UDACT-300A Digital Alarm Communicator Transmitter/ Dialer Module allows Mircom’s FA-1000, FX-2000 or FleX-Net Series Fire Alarm Control Panels to transmit Alarm, Supervisory and Trouble information on two telephone lines to a monitoring facility.

The UDACT-300A is powered by the host fire alarm control panel and communicates with the fire alarm control panel via an RS-485 data link. The Digital Communicator can be programmed for dual line operation and uses the Security Industry Association (SIA) and Ademco Contact ID reporting protocols.

The UDACT-300A can be configured locally via the on-board keypad and the CFG-300 Configuration Tool or with a UIMA programming tool and a computer with an available serial or USB port. In addition the UDACT-300A can be remotely configured using a personal computer with a modem.

The UDACT-300A can be configured for either DACT or UDACT operation. In DACT mode the Digital Communicator reports common alarm, trouble and supervisory information. In UDACT mode the Digital Communicator reports point specific information. In addition the UDACT-300A is equipped with the ZDACT feature that allows for input circuits on the FX-2000 or FleX-Net panel to be grouped into software zones for the purpose of reporting to a central monitoring station.

Additional information

Weight	1 lbs
Condition	New
Brand	Mircom
Production Status	Active

Reviews

There are no reviews yet.

Be the first to review “Mircom UDACT-300A”

You must be logged in to post a review.

Attributes

Weight	1 lbs
Condition	New
Brand	Mircom
Production Status	Active

Product Features

Communicates with Mircom’s FA-1000, FX-2000 or FleX-Net Series fire alarm control panels via an RS-485 data link
Programmed to use the Ademco Contact ID and SIA-DCS reporting protocols
Can be configured for DACT or UDACT mode of operation
DACT mode transmits a common Alarm, Supervisory, Waterflow and Trouble information
UDACT mode transmits point-specific Alarm, Supervisory, Waterflow, and Trouble information
ZDACT feature allows for input circuits on the FX-2000 or FleX-Net panel to be grouped into software zones so that the UDACT-300A will report any individual event as a group event
Reports either the circuit number or the combination of loop number and address when used with the FX-2000 or FleX-Net Series
Event number offset for output circuit numbers provides the ability for each circuit on an FX-2000 or FleX-Net Series panel to have a unique circuit number transmitted to the monitoring station
Override feature allows for the device type to be changed from the standard input type on the FX-2000 or FleX-Net Series panel to a pre-defined input type that is sent to the monitoring station
UDACT-300A has the ability of disconnecting the incoming and outgoing calls and capturing the line for transmission to the Digital Alarm Communicator Receiver (DACR)
Onsite or remote programming
Onsite configurable with the on-board keypad and the CFG- 300 Configuration Tool or using the UIMA Programming Tool and a computer with an available serial or USB port
Remotely configurable via a Personal Computer with a modem (Configuration is passcode protected)
Provides telephone line monitoring and reports status via LED indication on-board
Provides event logs of 500 entries each to save events from local dialer or remote fire alarm panel
Logs can be reviewed locally with the CFG-300 Configuration Tool or remotely via modem
Continuously supervises the status of each of two connected telephone lines at approximately one minute intervals
Mounts in a dedicated location in the FA-1000, FX-2000 or FleX-Net Series main chassis

What's Included

Shipping Details

Pricing & Lead Times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

Equipment must be returned within (30) days of the date it was shipped, or made ready for pickup. In order to initiate a return, you must contact our sales team via email at [email protected] to receive an RMA # if it meets all criteria. Products returned after (30) days from our shipment date will be refused. After RMA acceptance, any parts that are returned to FireAlarm.com are subject to a minimum 25% restocking fee. New parts must be returned with original packaging, in un-opened, and uninstalled condition. If not, these parts may be subject to increased restocking fees or refusal. Depending on the circumstances of your order, and if you are a long-time customer of FireAlarm.com, other arrangements can be made. See our complete return policy for more information at: https://firealarm.com/faq/

Testimonials

"Great service. I received help with exactly what I needed and I received it all in a timely manner."

"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"

"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."

"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

Reviews

There are no reviews yet.

Be the first to review “Mircom UDACT-300A”

You must be logged in to post a review.

You may also like…