This product has been replaced by

Notifier FSB-200S

Intelligent beam smoke detector with integral sensitivity test

Manufacturer Part #: FSB-200S

Notifier FSB-200S

$1,054.00

Intelligent beam smoke detector with integral sensitivity test

Availability: Estimated 8 days

Condition: New

Brand: Notifier

Status: Discontinued

SKU: 54734

Manufacturer Part #: FSB-200S

Replacement: FS-OSI-RI

Description

The Notifier FSB-200 and FSB-200S are intelligent, addressable reflected beam smoke detectors for protecting open areas with high and sloping ceilings, and wide-open areas, where spot-type smoke detectors are difficult to install and maintain. Ideal applications are atriums, cathedral ceilings, aircraft hangars, warehouses, sporting arenas, concert halls, and enclosed parking facilities. They are compatible with the NFS-3030, NFS2-3030, NFS-640, NFS2-640, and NFS-320 in FlashScan® or CLIP mode, as well as legacy addressable panels. Installation of the single-ended reflective design is much quicker than a dual-ended projected beam detector. Alignment is easily accomplished with an optical sight and a two-digit signal strength meter incorporated into the beam detector. Listed for operation from –22°F to 131°F, the FSB-200 and FSB-200S are usable in open area applications where temperature extremes exceed the design limits of other types of smoke detection.

Documents

Description

The Notifier FSB-200 and FSB-200S are intelligent, addressable reflected beam smoke detectors for protecting open areas with high and sloping ceilings, and wide-open areas, where spot-type smoke detectors are difficult to install and maintain. Ideal applications are atriums, cathedral ceilings, aircraft hangars, warehouses, sporting arenas, concert halls, and enclosed parking facilities. They are compatible with the NFS-3030, NFS2-3030, NFS-640, NFS2-640, and NFS-320 in FlashScan® or CLIP mode, as well as legacy addressable panels. Installation of the single-ended reflective design is much quicker than a dual-ended projected beam detector. Alignment is easily accomplished with an optical sight and a two-digit signal strength meter incorporated into the beam detector. Listed for operation from –22°F to 131°F, the FSB-200 and FSB-200S are usable in open area applications where temperature extremes exceed the design limits of other types of smoke detection.

Additional information

Weight	3.70 lbs
Dimensions	3.30 × 7.50 × 10.00 in
Manufacturer	Honeywell International
Unit of Measurement	EA (Each)
Condition	New
Production Status	Discontinued
Compatibility	NFS-320
Brand	Notifier
Listings & Approvals	CSFM, FM, MEA, UL
Operating Temperature	–22°F to 131°F (–30°C to 55°C)

Reviews

There are no reviews yet.

Be the first to review “Notifier FSB-200S”

You must be logged in to post a review.

FSB-200(A) and FSB-200S(A); Single-Ended, Reflector-Type Addressable Beam Smoke Detector

Notifier - Data Sheet

Attributes

Weight	3.70 lbs
Dimensions	3.30 × 7.50 × 10.00 in
Manufacturer	Honeywell International
Unit of Measurement	EA (Each)
Condition	New
Production Status	Discontinued
Compatibility	NFS-320
Brand	Notifier
Listings & Approvals	CSFM, FM, MEA, UL
Operating Temperature	–22°F to 131°F (–30°C to 55°C)

Product Features

Listed to UL 268, ULC CAN/ULC S529.
Transmitter/receiver built into same unit.
Six user-selectable sensitivity levels.
16′ to 328′ (use BEAMLRK beyond 230′) protection range.
Removable plug-in terminal blocks.
Digital display — no special tools required.
Built-in automatic gain control compensates for signal dete- rioration from dust buildup.
Optional remote test station.
Optional long-range kit (BEAMLRK) for applications in excess of 230′ (70 m).
Optional multi-mount kit (BEAMMMK) providing ceiling or wall mount capability with increased angular adjustment.
Optional heater kits (BEAMHK and BEAMHKR) for prevention of condensation (not intended to increase or reduce the specified operating temperature).
Paintable cover.

What's Included

Shipping Details

Pricing & Lead Times are based on details provided directly by the manufacturer, our network of distributors and based on historical lead times on any given product. This is the most up-to-date information we have currently. All orders are subject to 1 – 5 days of processing as the units must go through our product verification process at our main Shipping Hub in New York prior to being shipped out to you. Depending on your circumstances, we can expedite this processing time for additional costs, but orders cannot be expedited unless they are currently in stock. PLEASE NOTE: Any and all pricing and availability are subject to change without notice being given to the client.

Return Details

Equipment must be returned within (30) days of the date it was shipped, or made ready for pickup. In order to initiate a return, you must contact our sales team via email at [email protected] to receive an RMA # if it meets all criteria. Products returned after (30) days from our shipment date will be refused. After RMA acceptance, any parts that are returned to FireAlarm.com are subject to a minimum 25% restocking fee. New parts must be returned with original packaging, in un-opened, and uninstalled condition. If not, these parts may be subject to increased restocking fees or refusal. Depending on the circumstances of your order, and if you are a long-time customer of FireAlarm.com, other arrangements can be made. See our complete return policy for more information at: https://firealarm.com/faq/

Testimonials

"Great service. I received help with exactly what I needed and I received it all in a timely manner."

"I had a big engineering/logistics issue that William over at FireAlarm.com helped me with. I don’t know what I would’ve done without their help!"

"The fastest delivery I’ve seen. Needed overnight emergency parts and I got just that."

"Needed last-minute maintenance done on my building’s system, and FireAlarm.com exceeded my expectations with how quickly it was done."

Leave a review

Reviews

There are no reviews yet.

Be the first to review “Notifier FSB-200S”

You must be logged in to post a review.

You may also like…

You may also like...

System Sensor BEAMSMK

Surface mounting kit for use with Reflective Projected Beam Smoke Detectors

Mfr. Part #: BEAMSMK

SKU: 30830

$37.74

System Sensor BEAMMMK

Multi-mounting Kit for use with Reflective Projected Beam Smoke Detectors

Mfr. Part #: BEAMMMK

SKU: 30819

$63.33