Fire-Lite ANN-RLED


LED Annunciator Module

Availability: Please Call for Availability

  • Factory New
Brand: Fire-Lite Part #: 30245 Category: Manufacturer Part #: ANN-RLED


The ANN-LED annunciator module provides LED annunciation of general system faults and input zones/points when used with a compatible Fire Alarm Control Panel (FACP). The ANN-LED module provides alarm (red), trouble (yellow) and supervisory (yellow) indication for up to ten input zones or addressable points. ANN- RLED has red LEDs only for alarm communication of up to 30 addressable points.

The ANN-LED is supplied standard with certain Canadian FACPs as required by ULC.

The ANN-LED and the FACP communicate over a two-wire serial interface employing the ANN-Bus communication format. An additional two wires are used for 24-volt DC power. A single four-conductor unshielded cable may be used for both power and data communications.

Up to eight ANN-Bus devices may be connected to the ANN-Bus of each FACP.


Weight 2 lbs






Production Status



  • ANN-LED connects to the ANN-Bus terminal on the FACP and required minimal programming
  • Includes three LEDs for each zone: Alarm, Trouble, and Supervisory
  • Compatible with the ES-200X, ES-50X, MS-9600(UD)LS, MS-9200UDLS, MS-9050UD, MS-5UD, MS-10UD, MRP-2001, and MRP-2002
  • Can be remotely located up to 6,000 feet (1,829 m) from the panel
  • May be powered by 24 VDC from the host FACP or by remote power supply (requires 24 VDC)


ANN-LED: LED Annunciator Module
ANN-(R)LED Series: Product Installation Document