Intelligent 3D Multisensor Detector – UL/ULC Listed

Availability: In Stock

Condition: New
Brand: Kidde
Status: Obsolete
SKU: N02A-6543
Manufacturer Part #: GSA-PHS
Replacement: KI-PHD


The Signature Series Model GSA-PHS Intelligent 3D Multisensor Detector gathers analog information from each of its two fire sensing elements (photoelectric and heat) and converts it into digital signals. The detector’s on-board microprocessor measures and analyzes these signals separately with respect to a third element – Time. We call this technology 3D. It compares the information to historical readings, time patterns, and several known fire characteristics to make an alarm decision. Digital filters remove signal patterns that are not typical of fires. Unwanted alarms are virtually eliminated. The microprocessor in each detector provides four additional benefits – Self-diagnostics and History Log, Automatic Device Mapping, and Fast, Stable Communication. Self-diagnostics and History Log – Each Signature Series detector constantly runs self-checks to provide important maintenance information. The results of the self-check are automatically updated and permanently stored in the detector’s non-volatile memory. This information is accessible for review any time at the control panel, PC, or by using the SIGA-PRO Signature Program/Service Tool. Automatic Device Mapping – The loop controller learns where each device’s serial number address is installed relative to other devices on the circuit. This mapping feature provides supervision of each device’s installed location to prevent a detector from being reinstalled (after cleaning etc.) in a different location from where it was originally. The history log for the detector remains relevant and intact regardless of its new location. Fast Stable Communication – On-board intelligence means less information needs to be sent between the detector and the loop controller. Other than regular supervisory polling response, the detector only needs to communicate with the loop controller when it has something new to report.

Additional information

Weight 0.5 lbs




Material Qualities

High Impact Resistance

Detection Method

Fixed Temperature, Photoelectric


Thermal Rating




Production Status




  • Integrates photoelectric smoke and 135 ° F (57 ° C) fixed-temperature heat sensing technologies
  • Non-volatile memory
  • Automatic device mapping
  • Electronic addressing
  • Environmental compensation
  • Integral microprocessor – intelligent detector
  • Wide 0.67% to 3.77%/ft. sensitivity range
  • Twenty pre-alarm sensitivity values, set in 5% increments
  • Identification of dirty or defective detectors
  • Automatic day/night sensitivity adjustment
  • Twin RED/GREEN status LEDs
  • Standard, relay, fault isolator, and audible mounting bases
  • Designed and manufactured to ISO 9001 standards


There are no reviews yet.

Be the first to review “Kidde GSA-PHS”

Intelligent 3D Multisensor Detector; GSA-PHS


Kidde – Data Sheet