Silent Knight IFP-100ECS

Emergency Communication System with Fire Alarm Control Panel

  • Factory New
  • Material Obsolete
Brand: Silent Knight Part #: 45423 Categories: , Manufacturer Part #: IFP-100ECS


The IFP-100ECS is an intelligent analog/addressable fire alarm control panel combined with an Emergency Communication System (ECS). When the ECS features are enabled, they are integrated with the fire alarm and voice evacuation functions of the control panel. The IFP-100ECS panel and accessories provide features to meet the requirements for Mass Notification Systems as described in UL 2572.

The IFP-100ECS has four notification appliance circuits that can be programmed for notification outputs or auxiliary power. The FACP also has a built-in, dual-line digital fire communicator, Form C trouble relay, and two programmable Form C relays. The firmware has powerful features such as detector sensitivity, day/night thresholds, drift compensation, pre-trouble maintenance alert, and calibration trouble alert.

The IFP-100ECS supports a variety of devices, including RA-100 or RA-1000 remote annunciators, 5824 serial/parallel printer interface module (for printing system reports), 5496 or RPS-1000 intelligent power modules, and IDP or SD devices.

The IFP-100ECS system is scalable from 50 to 1000 watts using a distributed amplification scheme to provide the power to the appropriate areas for evacuation coverage.


Weight 16 lbs
Dimensions 4.75 × 20 × 26.50 in




Silent Knight

Production Status



  • 15 Recordable one minute messages that can be mapped to eight ECS buttons.
  • Can select ECS message as priority over fire.
  • Support of up to seven ECS-RCU’s. The ECS-RCU meets the requirements for a LOC.
  • Programmable trigger inputs from an external source, such as a Monaco system, to either the VCM, RVM, or 5880. Up to eight inputs available on the 5880 module.
  • Built-in support for up to 99 IDP detectors and 99 IDP modules or 127 SD devices.
  • All the features of the IFP-100 Fire Alarm Control Panel combined with an emergency communication system.
  • Support for up to eight ECS-50W’s, ECS–125W’s, or ECS-DUAL-50W’s (SBUS addressable amplifiers) for a maximum of 1000 watts per system.
  • Single enclosure for both fire and emergency control system components.
  • On-board supervised microphone.
  • Up to 64 mappable speaker circuits using a combination of ECS-50W / 125W’s and ECS-CE4’s mappable to 40 buttons controlling selected output groups.
  • Supports 25 Vrms or 70.7 Vrms speaker circuits using ECS-50W’s.
  • UL listed for 250Hz signaling with ECS-DUAL50W and compatible speakers.
  • Built-in RS-232 and USB interface for programming.
  • All call and Non-Active Call buttons to quickly select all active or all the non-active output groups.

Silent Knight IFP-100ECS Data Sheet

Farenhyt - Data Sheet