Klaxon SWG0028

Features

• Audibility range between 135db @ 1 metre
• 475Hz constant tone signal
• ATEX approved for zone 1 & 2
• Overall siren standard approval Exd IIG IIC T4
• Non electrical parts standard approval EExc IIC T1 T6 X
• Roughly omni-directional sound coverage which peaks in the direction of the front stator face
• 400Vac +/- 10% 50Hz 3 phase nominal power supply requirement
• Operating temperature range for the FP6 & FP10 units of -20 to +60 degrees C
• Cast aluminium & steel construction
• Environmental rating of IP55
• If the power supply to the sirens is pulsed to enable the siren to produce a ‘wail’ tone then the maximum run time of the siren is reduced from continuous for constant tone to 15 minutes or less
• Control units can be supplied to enable the siren to produce the ‘wail’ tone signal with associated control switches. The controls are only suitable for locating in a non-hazardous area
• The Motor windings are tropicalized as standard
• Anti-condensation heaters for the motor can be supplied
• The standard siren builds offered are fitted with EExde rated motors
• High output siren sound (135dB)
• Rugged weatherproof construction